I believe the solenoid contacts are in need of replacement and I wanted to check over the starter motor at the same time as replacing the solenoid contacts.
( I am just getting a click have checked the usual battery etc)
Just the top nut to remove and hopefully will be able to remove it.
Ron
( I am just getting a click have checked the usual battery etc)
Just the top nut to remove and hopefully will be able to remove it.
Ron
Monkey13
New Member
Obviously it's up to you but nothing goes wring with the starter apart from the solenoid contacts, it's easy to take the 3 screws off the solenoid cap and pull the solenoid out and replacer the contacts with the starter still in the engine, done it loads of times (disconnect Bart first lol)
jamesmartin
Well-Known Member
15mm socket and a 6 inch ish extension ,you need contact and plunger kit ,if starter works well except when clicking dont bother stripping starter
Thanks to everyone who has responded to my thread.
I have now removed the Solenoid end cap the plunger and spring, I cant seem to see any contacts to replace? where are they and what do they look like.
I have ordered a rebuild kit from ebay and the picture shows a number of small parts which I cant seem to see in the solenoid body, guidance would be most welcome.
Thanks in advance.
Ron
groenendael
Active Member
If you use the wonderful search engine "GOOGLE", you'll find all the info you need.
Even down to hands on videos on how it's done, which can be found
on UTUBE.
Have fun.
Even down to hands on videos on how it's done, which can be found
on UTUBE.
Have fun.
Hi,
Got starter motor of and replaced contacts all back together and running now.
Thanks again for advice.
Ron
