Bottom line . . if the 24mm bolt is not tight it will never move the tensioner spring. I'm fairly sure it's a normal CW thread.

You need to tighten the 24mm first, and then tighten up the locknut behind, as per the picture posted by Arctic2.

The assembly looks like the attached pic (from RAVE), so you cannot remove the assembly with the engine in the car :(
1726170127451.png
 
pwood999 said:
Bottom line . . if the 24mm bolt is not tight it will never move the tensioner spring. I'm fairly sure it's a normal CW thread.

You need to tighten the 24mm first, and then tighten up the locknut behind, as per the picture posted by Arctic2.

The assembly looks like the attached pic (from RAVE), so you cannot remove the assembly with the engine in the car :(
View attachment 325838
Click to expand...
Real photo of the pulley tensioner.
f28Da0Ul.jpg
1a

4SBNGpWl.jpg
1b

All the pulleys freewheels off the car.
2bT7eQRl.jpg
1c

Yes it is a pulley wheel which is attached to an arm which is the tensioner spring arm, so you need to tighten the back nut, then the arm will go backwards anticlockwise when you pull towards you on the wheel 24mm bolt.
J6r4mgul.jpg
2

SdHQ3XJl.jpg
3

ppmJllLl.jpg
4

Tool i use for the tensioner when changing the belts, these are ground down so they can also be used on the Rover 75 with limited space against the chassis arm.
FzVC79Ul.jpg
5

H59e1ROl.jpg
6

Igjc6Bll.jpg
7

15mm aviation spanner is good for getting to the 15mm nut behind the wheel.
www.ebay.co.uk

14mm + 15mm Metric Double Ended Ring Spanner Aviation Wrench 12 Sided | eBay

Double ended ring spanner so one spanner has 2 rings with different sizes. 14mm and 15mm long ring spanner aviation. 14mm and 15mm double headed spanner. One spanner covering 2 different sizes (14mm and 15mm).
www.ebay.co.uk

www.ebay.co.uk

Draper HI-TORQ® Metric Extra-Long Double Ring Ratchet Spanner 15mm 27771 | eBay

Heavy Duty. Optimal leverage through 12-point HI-TORQ® ring ends. Extra length improves access to hard-to-reach spaces. DIY Car Service Parts. Champion Glow Plugs. Bosch Glow Plugs. TypeDouble Hex. Modified ItemNo.
www.ebay.co.uk

Good luck you will get there.
 
I bought a spanner extender to move the tensioner, and keep it loose. Was awkward to hold it, get the belt on and not get one skin behind the belt. To stop the spanner slipping off a wedge of wood may help.
 
A 15/16 inch ring spanner is a better fit than 24mm. They are cheap and turn up at junk tool sales. Well worth having an old one handy. You can weld an extension on, or just slip a pipe on it as I do.
 
Last edited:
WOOOOOOHOOOOOOOO!!!! done!!!!!
I manage to insert a 15 mm curved behind the tensioner and then used my home made 24mm and it tight the tensioner , came out easy breeeeezyyyy.
YOU GUYS ARE JUST AMAZING!!!!
THANK YOU ALL!!!

ONEEEEEEE LAST QUESTION i know you might kill me but...

I dont have the tool to remove the pulley....
i have seen..
using the engine (hey say you shouldnt)
using the impact wrench (they say you shouldnt )
using a belt with a wrench to hold it
What are your thoughts?
and then to tight it again?

By the photo my pulley was getting noisyyyyy
 

Attachments

  • 1726228585430.jpg
    1726228585430.jpg
    223.4 KB · Views: 30
  • 1726228585438.jpg
    1726228585438.jpg
    239 KB · Views: 30
Never use impact wrench on TD4 as you will fracture the cast iron crankshaft.

Tool is the answer. Buy a good one or it bends !!!
 
You must log in or register to reply here.

Similar threads

Lex Myster
Freelander 2 TD4 Timing Belt
Replies
4
Views
613
Stanleysteamer
Stanleysteamer
C
Freelander 2 (LR2) Chasing weird noises
Replies
19
Views
2K
Craig_mate
C
A
Freelander 1 TD4 Alternator multi pin plug
Replies
14
Views
3K
Alex19Baker
A
A
HOUSTON, WE HAVE A PROBLEM....
Replies
3
Views
813
Alex1000
A
R
Freelander TD4 starting problems
Replies
8
Views
1K
Nodge68
Nodge68