New MOT Regs mean that the angle of the number plate has to be within a certain spec whereas over a year ago it was not much of a concern
 
I know it's not legal, it's got to be as close to the front of the vehicle as possible and as vertical as possible. I've got some magnetic tape, so I'm going to get another plate to stick on the bumper that's removable when off road, just yet another job to do.
 
Well done with that winch Brett. Looks fantastic.

I still cant get the 4th injector out and its getting damaged from all my efforts. Is it ok for me to use a freeze spray of some kind on it and will that help get it out? Any other ideas? Other injectors seem to move reasonably easily but this one won't budge. I'm trying to swap it with one that work incase there is a problem with injector 4.

In the mean time I'm thinking of getting a crap little runabout to keep going when i can tinker on the landy. Gotta be £500 or less..
 
landroverjack said:
Well done with that winch Brett. Looks fantastic.

I still cant get the 4th injector out and its getting damaged from all my efforts. Is it ok for me to use a freeze spray of some kind on it and will that help get it out? Any other ideas? Other injectors seem to move reasonably easily but this one won't budge. I'm trying to swap it with one that work incase there is a problem with injector 4.

In the mean time I'm thinking of getting a crap little runabout to keep going when i can tinker on the landy. Gotta be £500 or less..
Click to expand...


Why do you need the no. 4 injector out? Why not take the head off and use a towel to get the water out, then you can check valves and stuff?
 
The garage advised me to swap that injector with one I knew was working so I could go by trial and error. Don't want an injector thats stuck in there forever anyway lol!
 
Ok good luck!! Trial and error is a very good way of wasting time and money!! Get the head off and knock it out from the other side! Then you can SEE all the water is out and the valves are not bent!!
 
Last edited:
roll cage bolts What a bastid!!!!!!!!!!! Is all i can say 5 more to go! And somone before had used ring ended bolts and they were no way 8.8's cos i hammered the heads orf!
 
Hi Booger I was down your old place pretty much earlier Kingston. Yea Its an open vehicle no roof the cage is the roof eek Wet arse trialling how it should be!
 
Booger said:
Hey Boys, Hope it's going well in Herts... and that the peasants are not rioting there too :D
Click to expand...


Depends who starts owt.

If owt is started by the people that are (every week of late) down town with banners and plaques supporting terrorism and asking for their own law to be in place aswell as slagging orf our troops there will be some serious riots.

There shed loads and I mean shed loads of nutters all over here just waiting for a reason to hit the above supporters. It would not be pleasant but it's gonna happen at some point. It could be anything to spark it off any small thing there are so many people ****ed off, skint and any race religion or group seeming to take the **** or get out of line will just cause mayhem I feel sorry for the bastids I remember the riots in Marsh Farm things will be far worse this time if it blows up.
 
jai_landrover said:
I'll be tucked up with stella cider watching the chavs or whoever kick orf!
Click to expand...

I'm so wired from trading today, don't think I will be able to sleep for a week.....

If you think the going on's in London were crazy, you should have seen the stock market today.... The world has gone insane....
 
You must log in or register to reply here.

Similar threads

A
Hampshire Green Lane Trip 11th August.
2
Replies
26
Views
2K
Anaconda
A
G
Top 100 green lanes
2 3
Replies
46
Views
4K
Freddie17
Freddie17
A
Peak District lanes
Replies
8
Views
2K
Anaconda
A
ar1g3
P38A Looking for p38 parts in Kent area
Replies
13
Views
941
Datatek
Datatek
A
Non Scratchy Greenlane Trip Berkshire/Wiltshire
Replies
10
Views
3K
Anaconda
A