A

Abaddon

Member

• Mar 21, 2021

• #1

Hi, I'm stuck on removing the hub carrier. the nuts off the upper joint, the stem snapped on the lower joint level with the collet when I tried to remove the nut. I've got pickle forks hammered in and it's not dropping, do I need to remove the collet first because it wont budge. Thanks Jim.

P.S. Disco 2 2002 TD5

 

Last edited: Mar 21, 2021

Europa486

Well-Known Member

• Mar 21, 2021

• #2

Your question is pretty meaningless without the model and year of Land Rover,

 

A

Abaddon

Member

• Mar 21, 2021

• #3

Europa486 said:

Your question is pretty meaningless without the model and year of Land Rover,

Click to expand...

Sorry, Disco 2 2002 TD5.

 

jamesmartin

Well-Known Member

• Mar 21, 2021

• #4

Abaddon said:

Hi, I'm stuck on removing the hub carrier. the nuts off the upper joint, the stem snapped on the lower joint level with the collet when I tried to remove the nut. I've got pickle forks hammered in and it's not dropping, do I need to remove the collet first because it wont budge. Thanks Jim.

P.S. Disco 2 2002 TD5

Click to expand...

no, hit the fork harder or hit the housing directly opposite the stuck taper

 

A

Abaddon

Member

• Mar 21, 2021

• #5

jamesmartin said:

no, hit the fork harder or hit the housing directly opposite the stuck taper

Click to expand...

Thanks

 

02Disco2

Well-Known Member

• Mar 21, 2021

• #6

Worth trying a bit of heat. Mine came out in the end!!

 

Attachments

• 
  F0D54A44-4EB1-40F9-9670-16AA4FC64AB0.jpeg

  230.4 KB · Views: 134

A

Abaddon

Member

• Mar 23, 2021

• #7

02Disco2 said:

Worth trying a bit of heat. Mine came out in the end!!

Click to expand...

I couldn't break the tapers at all, I ended up cutting the tapers off, put the hub carrier in my blacksmith forge and punching them out at red heat, it still took a good wallop with a 3lb hammer. All done now. Thanks for your help.