No engine doesn't spin as you turn the key it just beeps and says engine immobilised press remote .transfer nuetral gone now as I've put on new battery
 
Really needs diagnostics IMO to see if the BECM is getting a valid FOB code amoungst other things..
 
Not by the button only by turning the key anticlockwise
So the FOB is not working or the RF receiver is faulty or disconnected or there is a BECM fault by the sound of it. Still needs P38 specific diagnostics.
If the FOB/RFreceiver etc was working, pressing the button would sort the problem. Have you checked to see if the RF receiver is connected?
 
....and the syncmate you have tried is for the THOR engine?

If it is and you still get no comms....the BeCM could be in an alarmed state....you'll need some decent P38 Diags to sort that
 
Transfer neutral,widows not set sunroof not set etc key code lockout engine disabled press remote and indicators flashing

Key code lockout means you have lost sync. First, replace the batteries in your key fob, second, find the manual and read very thoroughly through the instructions for entering the EKA-code. Follow the procedure to the letter and on the final turn of the key your doors should all unlock and indicators flash. If you do this right and there's nothing else wrong with your car, it should fire right up. You can search the forum as well for tips on EKA code entering.

Good luck
 

Similar threads