Brenda__the__Defender

Member

• Apr 24, 2024

• #1

Hi Guys,

I hope this is ok to ask here? @admin if not please let me know!

As a side project, I've been building a 3d model of a Land Rover (Currently my own 110 hcpu) with the intention of making all different versions at some point to swap in/out parts on etc.

I have one problem currently and that is in my HCPU there is wood bolted to the inside of the tub. So there are a couple of bits I can't see. Does anyone have or could take a few pictures of the tub inside? Specifically around the tailgate ends where it meets in the corners. I can't find decent images online to base the model off of.

Images attached for reference! I've circled the area I can't figure out.


Thanks in advance
Matt

 

Attachments

• 
  example.png

  578.7 KB · Views: 102
• 
  example_2.png

  548.7 KB · Views: 93

tottot

Well-Known Member

• Apr 24, 2024

• #2

Hi, Nice model there but do not have a Hicap so can not help.

 

Brenda__the__Defender

Member

• Apr 24, 2024

• #3

Thanks. Decent accurate Landy models are few and far between so I decided to make my own. Hoping to 'share' it in some form at some point, but it's nowhere near ready yet.

 

dag019

Well-Known Member

• Apr 24, 2024

• #4

Brenda__the__Defender said:

Thanks. Decent accurate Landy models are few and far between so I decided to make my own. Hoping to 'share' it in some form at some point, but it's nowhere near ready yet.

Click to expand...

@Hicap phill will probably be able to help. However bear in mind that any hicap that has has been used is likely to have a fairly battered rear tub (no judgment of @HiCapphills land rover intended!)

 

Brenda__the__Defender

Member

• Apr 24, 2024

• #5

dag019 said:

@Hicap phill will probably be able to help. However bear in mind that any hicap that has has been used is likely to have a fairly battered rear tub (no judgment of @HiCapphills land rover intended!)

Click to expand...

 

Brenda__the__Defender

Member

• Apr 24, 2024

• #6

@dag019 Thanks for the heads up. Dented or not is fine, its more about how the panels 'join' at the seams etc. I've got most of it done now, but that inner tailgate corner where it meets the floor I cant seem to get any decent images of!

 

Brenda__the__Defender

Member

• Apr 24, 2024

• #7

Also, I can share the instagram account where I post updates semi regularly, but I don't want to do that if its against the 'rules'?

 

H

Hicap phill

Well-Known Member

• Apr 24, 2024

• #8

@Brenda__the__Defender

What photos do you need?
I will take these when I return home Friday/saturday.

 

Brenda__the__Defender

Member

• Apr 25, 2024

• #9

Hicap phill said:

@Brenda__the__Defender

What photos do you need?
I will take these when I return home Friday/saturday.

Click to expand...

I think I have the shot now! I managed to get it myself. So for now all good! Just got the underside of the tub (supports etc) to get in then I can finally put the tub to rest and get on with the rest of it!


Thanks for the offer though!


Matt