hi guys, rebuilding the series 3 and just starting to put the cab together and in place but i seem to have an issue with it fitting.
I have bought the cab rail which fills in the gap between the seat back and the cab but the whole thing seems to tilt forward...When you level it up the gap at the sides is about 1cm ..
Do you still used the galv strip that rivets on the seat back panel or does it sit on top..Will try to post some pictures but anyone with a 88ins pickup if they could look at theirs and let me know.
Many thanks in advance
john
I have bought the cab rail which fills in the gap between the seat back and the cab but the whole thing seems to tilt forward...When you level it up the gap at the sides is about 1cm ..
Do you still used the galv strip that rivets on the seat back panel or does it sit on top..Will try to post some pictures but anyone with a 88ins pickup if they could look at theirs and let me know.
Many thanks in advance
john