need some ideas on how to insert rod and get clip to fit in side bell house.
have taken out slave and i came out with it. Must be a nack to it .can anyone help

RICHARDRJSRS said:

need some ideas on how to insert rod and get clip to fit in side bell house.
have taken out slave and i came out with it. Must be a nack to it .can anyone help

Click to expand...

I think that patience is going to be the name of the game, put her on axle stands for more room,get comfy and fiddle,super glue?maybe make a tool or two to help.
Spotted someone last year with this problem in the "deepender bit" took him bloody ages but I think he did it in the end-Try a post in there, same engine!

I recently changed my clutch and put a tie clip on to hold rod on to clutch arm to try avoide this ever happening in the future!!!

Small mirrors and patience.

Snap-On sell the little mirrors, but I don't know where you can buy patience.

CharlesY

Took me a bit of grease (used as glue), a flat long screwdriver, two unsuccessful attempts and about 60 secs. Just find yourself a comfortable position and you'll do it.