Western Slope Rover
Well-Known Member
Thank you, mate!Right, inside the vehicle the changer sits on a plate pop rivetted to the tunnel - with the actual changer bolted to it - you can see the pop rivets and the SS bolts in my pic ( off a project ) below.... ( gear knob is held on by a c-clip under the cover, and then the nut hold the knob on .... )
---View attachment 255371
---
So, under the plastic cover, this is what you'll find ... cable obviously at the bottom on this pic ....
View attachment 255372
Inside the changer itself:-
View attachment 255373
So, the cable outer is held into the body by the "red" clip ... and the cable inner in to the mechanism by the "green" clip ....
View attachment 255374
Hope that helps - if you need anything else, let me know
All fixed. Turns out the circlip on the shift cable popped off.