ONE LIFE LIVE IT. D90

Active Member

• Mar 27, 2015

• #1

Hi all

I need your help please. I've purchase a 12tonne workshop press. And I've come to press in the Ball joint into the fulcrum this evening.

I struggled to press the ball joint in square for some occasions while I was pressing it in. But the last 1/3rd of the pressing action was smooth and square.

The ball joint is now snug and square in the fulcrum. However the ball joint is very stiff. Which I didn't notice before I pressed it in. It's that stiff it's very difficult to move by hand.

Have I damaged the ball joint and fulcrum? Or will it be okay?

Thanks in advance. Yes I know I'm a bloody idiot.

 

td5tool

New Member

• Mar 27, 2015

• #2

They are quite tight when brand new, quite a lot of brand new ball joints are hard to move.
It'll probably be fine

 

ONE LIFE LIVE IT. D90

Active Member

• Mar 27, 2015

• #3

Thankyou mate. I can only just move it by hand. It's very stiff. I did press in on the flange too

 

td5tool

New Member

• Mar 27, 2015

• #4

Which part are you meaning when you say the flange?

 

ONE LIFE LIVE IT. D90

Active Member

• Mar 27, 2015

• #5

td5tool said:

Which part are you meaning when you say the flange?

Click to expand...

Like the ears of the joint. Basically around the rubber boot where the holes are.

 

td5tool

New Member

• Mar 27, 2015

• #6

Ahh that's where I press on them if were thinking of the same bit,
I'm sure you'll be fine

 

Pauleh

Active Member

• Mar 28, 2015

• #7

I bought a new fulcrum with the ball joint already pressed in because I didn't have a press and mine was just about moveable by hand, that's how they are when new. They only flop around when they're worn out and need changing!

 

ONE LIFE LIVE IT. D90

Active Member

• Mar 28, 2015

• #8

Thanks lads. Pleased to hear that.

I've just pressed in genuine bushes into the A frame arm. I've learnt my lesson. They went in a treat

 

The Gribbin

Active Member

• Mar 28, 2015

• #9

Now you just got the joy of fitting it all back... a day of impact wrench whine in my ears, and rust dust in my eyes...

I fitted genuine too... the old ones have lasted 14 years...

Nice smooth and tight feel back, like new

 

ONE LIFE LIVE IT. D90

Active Member

• Mar 28, 2015

• #10

The Gribbin said:

Now you just got the joy of fitting it all back... a day of impact wrench whine in my ears, and rust dust in my eyes...

I fitted genuine too... the old ones have lasted 14 years...

Nice smooth and tight feel back, like new

Click to expand...

With all new bolts it shouldn't be too bad. I've got a helper tomorrow too.

Have you fitted genuine all round? Does it feel much better?