W

wstwatson

New Member

• Oct 18, 2006

• #1

i have a td4 52 plate and i am thinking of fitting leather heated seats,how hard is it to wire these up and how

 

Zippy

New Member

• Oct 18, 2006

• #2

Take a look under your existing seats and you will see the wiring is already in place for the heaters within the leather seats, you need to add the switches on your lower dash and connect the plugs up under the seats and away you go.

 

W

wstwatson

New Member

• Oct 18, 2006

• #3

is the wiring already connected to the fuse box and where can i get the switches from (in between posting this thread i have purchased a set)

 

ming

SPACE TWOT

• Oct 19, 2006

• #4

Yep like Zip says all wiring in the loom [nice those heated seats]. . .

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Oct 19, 2006

• #5

yeah - i miss them

 

W

wstwatson

New Member

• Oct 19, 2006

• #6

is the wiring loom on a gs model and does this go from under the seats to the back of the lower console,also what will i have to buy to get these working,

thanks for your comments

 

Zippy

New Member

• Oct 19, 2006

• #7

The wiring is in the lower console, they supply one loom for the car no matter what model it is then just leave the plugs disconnected if certain options are not on a particular model.

Add the 2 switches in the console, the wiring plugs are already inside, connect the plugs which you will see coming out of the floor of the car to the plugs fitted under each leather seat and away you go.

 

Blippie

Well-Known Member

• Oct 23, 2006

• #8

So you don't need to worry about ECUs or anything?

Cool ...

Cheers

Blippie