wstwatson

New Member
i have a td4 52 plate and i am thinking of fitting leather heated seats,how hard is it to wire these up and how
 
Take a look under your existing seats and you will see the wiring is already in place for the heaters within the leather seats, you need to add the switches on your lower dash and connect the plugs up under the seats and away you go.
 
is the wiring already connected to the fuse box and where can i get the switches from (in between posting this thread i have purchased a set)
 
is the wiring loom on a gs model and does this go from under the seats to the back of the lower console,also what will i have to buy to get these working,

thanks for your comments:confused:
 
The wiring is in the lower console, they supply one loom for the car no matter what model it is then just leave the plugs disconnected if certain options are not on a particular model.

Add the 2 switches in the console, the wiring plugs are already inside, connect the plugs which you will see coming out of the floor of the car to the plugs fitted under each leather seat and away you go.
 

Similar threads