D

David1

Member
Hi all,

I have got a 1992 defender, which was a van back that had the alpine windows fitted by the previous owner.

I bought a 2nd hand rear headlining and recovered it. I went to offer it up earlier and noticed there doesn't appear to be any fixing points for the rear finisher above the rear door. Is the roof on the county different from standard 90s?

What have other people done to fit this part of the headlining please?

Cheers
IMG_4521.JPG
 
Dont know if this will help but what about double sided sticky tape, I bought two rolls of foam type double sided tape (simlar to what is used to stick number plates on) for less than £1 in my local Home Bargain store, it is really good stuff and very strong adhesive.
 
I would drill a couple holes in the central support bar and push some of those 'tree fittings' in, stop it from sagging and keeps it looking good!
 
There is 4 of these fir tree trim clips securing the rear roof panel. If I remember correctly the clips push into a basic u bracket that is spot welded on the inside of the rear panel of the roof.
image.jpeg
 
Also as you can see the grab handles (2) , act as securing point for the rear trim panel
 
K14 said:
There is 4 of these fir tree trim clips securing the rear roof panel. If I remember correctly the clips push into a basic u bracket that is spot welded on the inside of the rear panel of the roof.View attachment 135060
Click to expand...

Ah ok, I might need to make up a couple of brackets then for the bit above the door to attach too!! Cheers
 
You must log in or register to reply here.

Similar threads

dag019
Difference between hard top and station wagon roof
Replies
9
Views
433
julianf
julianf
mjr92
Rear sliding side windows
Replies
1
Views
303
julianf
julianf
styleruk
Rear slide window inserts
Replies
16
Views
1K
styleruk
styleruk
Tirran
90 headliner
Replies
3
Views
951
kermit_rr
kermit_rr
Bantam1
Disco 2 Water from sun visors
Replies
13
Views
2K
kevstar
kevstar