Gingerlugs

Member

• Jun 20, 2020

• #1

so just got me P38a last week and I’ve just realised that the head rest is 180 degrees out, turned round the wrong way. How the hell do i get the bastard back out to put in in correctly??.

Thanks in advance

 

brianp38dse

Well-Known Member

• Jun 20, 2020

• #2

Normally push the release bit at the bottom in and pull the headrest up.

 

Gingerlugs

Member

• Jun 20, 2020

• #3

brianp38dse said:

Normally push the release bit at the bottom in and pull the headrest up.

Click to expand...

Tried pushing the button but it won’t come out. The securing ridges are effectively in the wrong holes and it doing my head in!

 

RangeRoller dt

Well-Sprung Member

• Jun 20, 2020

• #4

Make sure the pins are all the way in and they come out with a tug. helps if you have the seat forward not upright in seating position

 

Gingerlugs

Member

• Jun 20, 2020

• #5

RangeRoller dt said:

Make sure the pins are all the way in and they come out with a tug. helps if you have the seat forward not upright in seating position

Click to expand...

Ok will try that, ty

 

Gingerlugs

Member

• Jun 22, 2020

• #6

I tried that but no joy. Facebook forum suggested I rotate the square plastic locating bit by 45 degrees and hey presto, it worked. Thanks all for your advice

 

brianp38dse

Well-Known Member

• Jun 22, 2020

• #7

Well i have learned something new today they, if only i can remember it when i need to