stewd

Active Member
Having an alarm that's louder than a v8 screaming its nuts off and an immobiliser that cuts 4 different circuits just isn't enough for me.

I remember years back my mums car had a "deadlock" setting which would slide bolts out of the doors and into the Pillars, I'm thinking this could be a great addition to my 110 especially as my alarm allows the control of central locking so these would activate upon setting the alarm. - see attached picture.

Has anyone fitted anything like this? Or am I asking for trouble...
 

Attachments

  • IMG_0165.PNG
    IMG_0165.PNG
    403.7 KB · Views: 240
I thought about it. But decided against it incase it ended up with me being stuck I the landy in a emergency if I got in trouble wading or a accident etc
 
I thought about it. But decided against it incase it ended up with me being stuck I the landy in a emergency if I got in trouble wading or a accident etc
 
You could get the manual Ones like the kind you get on house doors? With the star shaped key?
 
Having an alarm that's louder than a v8 screaming its nuts off and an immobiliser that cuts 4 different circuits just isn't enough for me.

I remember years back my mums car had a "deadlock" setting which would slide bolts out of the doors and into the Pillars, I'm thinking this could be a great addition to my 110 especially as my alarm allows the control of central locking so these would activate upon setting the alarm. - see attached picture.

Has anyone fitted anything like this? Or am I asking for trouble...
Have you got a link to those at all?
 
Great idea but automatic centre punch break glass and then climb in, obviously not me as Im to rotund!
If you have csw rear glass either side of the door that can be removed in about 5 seconds, vid on youtube scary easy.
 
Having an alarm that's louder than a v8 screaming its nuts off and an immobiliser that cuts 4 different circuits just isn't enough for me.

I remember years back my mums car had a "deadlock" setting which would slide bolts out of the doors and into the Pillars, I'm thinking this could be a great addition to my 110 especially as my alarm allows the control of central locking so these would activate upon setting the alarm. - see attached picture.

Has anyone fitted anything like this? Or am I asking for trouble...

Didn't Bobsticle fit summat like that, he asked Wammers to make a receiver 'cup' for it ...
 
Have you got a link to those at all?

This is where I stole the picture from.

http://m.ebay.co.uk/itm/222002605831?_mwBanner=1

As a fabricator by trade I would make my own up as I can get hold of the actuators for next to nothing, and some simple wiring and relays should do the job as the alarm would be linked in to them under the central locking system to active them.


Great idea but automatic centre punch break glass and then climb in, obviously not me as Im to rotund!
If you have csw rear glass either side of the door that can be removed in about 5 seconds, vid on youtube scary easy.

Just waiting on the glass guys to cut me two new bits of rear shatter proof glass to replace the sliding windows with, never open them they are currently screwed shut.
 
That's excellent, if you made a few sets of those people would no doubt buy them
 
Actuators & bearing runners ordered,

Will post an update later next week with some pic's if it all goes well once the bits turn up.
 

Similar threads