B

Benji55

Member

• Aug 8, 2022

• #1

Hi. New member here, thank you admin for acceptance.
Does anyone have experience of Maer chassis?
I’m about to purchase a replacement chassis for my defender 90 and struggling to decide. Marsland most expensive, richards mid price and shielder and Maer most competitively priced. Thanks

 

marjon

Well-Known Member

Full Member

• Aug 8, 2022

• #2

Welcome

Have a search in the main forum, heard good about the Maer, and bad about the shieder.
Others good but waiting times at the moment seem to be an issue.

So best to search/ask in the main forum lots here have done it so plenty advice will be forth coming.

Got any pics of your rust bucket? cos we like pics in this bit.

J

 

B

Benji55

Member

• Aug 8, 2022

• #3

Thanks. I didn’t realise I wasn’t posting on main forum, I will get the hang of this site in time.
I took a couple of photos for a before and after , if I get to the after stage

 

saxavordian

Well-Known Member

• Aug 8, 2022

• #4

Welcome to landyzone painting vehicles by numbers for idiots.

 

marjon

Well-Known Member

Full Member

• Aug 8, 2022

• #5

Theres many layers here.

General questions
Defender 90 / 110 / 130 | LandyZone - Land Rover Forum

Lots of others pleasure Pain experiences here for some night time reading.
Members Vehicles/Projects | LandyZone - Land Rover Forum

Good luck, and yes its not looking good.

J

 

B

Benji55

Member

• Aug 8, 2022

• #6

Thanks for the welcome, it’s much appreciated

 

steve24v

Well-Known Member

• Aug 8, 2022

• #7

Hi welcome, looks like you're going to have fun in the coming months

 

B

Benji55

Member

• Aug 8, 2022

• #8

steve24v said:

Hi welcome, looks like you're going to have fun in the coming months

Click to expand...

Thanks for the welcome. I'm finding my way round this excellent forum and found the members project thread. Some great projects posted.
I can’t find any negative reviews on Maer chassis so far. There must be a catch they are competitively priced

 

EeEk

Well-Known Member

• Aug 8, 2022

• #9

I have a maer chassis for my 110.....so far so good.

 

steve24v

Well-Known Member

• Aug 8, 2022

• #10

Benji55 said:

Thanks for the welcome. I'm finding my way round this excellent forum and found the members project thread. Some great projects posted.
I can’t find any negative reviews on Maer chassis so far. There must be a catch they are competitively priced

Click to expand...

Wish I went for a maer for my disco 2 rebuild due to the price. Went for a richards which cost £3000.
When I replaced the chassis on my 90 around 2011/2 I bought a marsland (cost £1050), don't think you can buy them direct anymore? How much do they charge nowadays

 

B

Benji55

Member

• Aug 8, 2022

• #11

Thanks everyone for the advice. The marsland coming in around £3.1k, Richards £2.6k and shielder and Maer around £2.2k

 

Knappster

Well-Known Member

Full Member

• Aug 8, 2022

• #12

Hi and welcome!

I’ve just had some welding done on my 90 which has made me look at a galvy chassis longer term so I’ll keep an eye on this discussion. I was leaning towards Richards but I’m open to other suggestions.

 

brianp38dse

Well-Known Member

• Aug 8, 2022

• #13

Hello and welcome

 

D

Dr Strangeglove

Well-Known Member

• Aug 9, 2022

• #14

Welcome - watching with interest!
Good luck with this, I hope you make the right choice.

 

julianf

Well-Known Member

• Aug 9, 2022

• #15

XD seem to have positive feed back also.

(I too am going to need one fairly soon)

 

B

Benji55

Member

• Aug 11, 2022

• #16

Ordered the Richards chassis today. Hoping to start dismantling the car next week when weather cools down. Any advice or guidance would be very much appreciated. Especially about body removal. I was hoping to remove the body as a whole, I’ve seen some very ingenious threads on how people done that, but wondering if dismantling it would be safer. How difficult is it to reassemble and line up the body parts on rebuild.
Thanks again for the welcome from members