Dreamed
Member
Hi!
Freelander TD4 2004 manual.
Today I was trying to take out the fuel pressure regulator, but I failed.
Basically the space is too narrow and I cannot even test what torx size I need. I took manifold out and I’ve heard some people took electromotor out. I unscrewed the electromotor but couldn’t take it out cause it’s fixed by a yellow cable. I tried to disconnect that cable by first unscrewing the structure that holds the Egr solenoid+all those sensor cables. But still couldn’t take it out as I don’t know how the yellow cable is supposed to come out and my hand barely fits... But I think even with electromotor out it would be difficult to unscrew the regulator.
Has anyone done this job? Is there a guide? What torx size do I need and what else do I still need to take out to remove regulator? I hope I don’t need to unplug coolant pipes and fuel lines. That would imply spilling coolant all over...
Freelander TD4 2004 manual.
Today I was trying to take out the fuel pressure regulator, but I failed.
Basically the space is too narrow and I cannot even test what torx size I need. I took manifold out and I’ve heard some people took electromotor out. I unscrewed the electromotor but couldn’t take it out cause it’s fixed by a yellow cable. I tried to disconnect that cable by first unscrewing the structure that holds the Egr solenoid+all those sensor cables. But still couldn’t take it out as I don’t know how the yellow cable is supposed to come out and my hand barely fits... But I think even with electromotor out it would be difficult to unscrew the regulator.
Has anyone done this job? Is there a guide? What torx size do I need and what else do I still need to take out to remove regulator? I hope I don’t need to unplug coolant pipes and fuel lines. That would imply spilling coolant all over...
