Trumar said:

Hello I have a Series 2a swb 1971, I have had to replace the front radiator panel. When I removed the knackered original radiator pane. The panel was only held on by the nuts and bolts down both sides of the inner wings. There is no fixings on the bottom of the radiator panel. Can someone please help with a step by step schematics of how and what fittings I need please.

Click to expand...

Blackburn said:

Do a web search for smithies landrover brings up a NZ web site of interest.
This is series 3 but quite sure same setup series 2 through to 3.

Click to expand...

Blackburn said:

Do a web search for smithies landrover brings up a NZ web site of interest.
This is series 3 but quite sure same setup series 2 through to 3.

Click to expand...

tottot said:

Yes series 2 the same as 3,Three bolts one in each corner of lower radiator panel and one in the center fitted to brackets on the chassis.Thin rubber pad between them.

Click to expand...

tottot said:

Try Paddock spares.

Click to expand...