NINETYMATT
Member
Hi everyone. The front oil seal on my 90 t-box has been leaking since I got the landy so after reading Buster and Trewey's excellent posts on replacing it i decided to give it a go. All was well and as expected until I found the felt washer the wrong side of the flange and then when i got to the oil seal, i found the mess in the pics.
My questions are:
I didn't expect to see such a wide seat beneath the oil seal, if this is what it is.
If it is like this, how would I go about getting the bearing out like in Buster's thread (if i wanted to do this in the future) that's why i thought i must have something different to what Trewey and Buster have.
This "seat" is damaged, presumably by someone who had a go and gave up, is this terminal?
The oil seal seams to be glued or stuck to this metal seat. The replacement i have in the gasket set is much thicker...
Does anyone recognise what i have here and can anyone help me replace the oil seal and fix this lot up please?
Thanks very much.
Matt
My questions are:
I didn't expect to see such a wide seat beneath the oil seal, if this is what it is.
If it is like this, how would I go about getting the bearing out like in Buster's thread (if i wanted to do this in the future) that's why i thought i must have something different to what Trewey and Buster have.
This "seat" is damaged, presumably by someone who had a go and gave up, is this terminal?
The oil seal seams to be glued or stuck to this metal seat. The replacement i have in the gasket set is much thicker...
Does anyone recognise what i have here and can anyone help me replace the oil seal and fix this lot up please?
Thanks very much.
Matt