14platoon

Active Member

• Nov 19, 2017

• #1

Ex MOD
Defender 90 on a 1992 reg

i have the front driver and passenger Squab type seats which I like. I’m looking to fit a front middle seat between these two but I can’t seem to find anywhere that does it. I will need the bracket / or runners and the actual pads.

Anyone got an idea where I can pick these up please?

 

D

Downsy

Member

• Nov 20, 2017

• #2

There was someone selling one on here, I got one loose when I bought my Tithounus, just drilled through and bolted it down. Not sure if it was right but works fine for me.

 

Rougharse Racing

Well-Known Member

• Nov 29, 2017

• #3

A Series 3 centre seat should fit, but I'm not sure that the lap-strap seat belt normally fitted to the Series 3 centre seat is particularly safe.

 

14platoon

Active Member

• Nov 29, 2017

• #4

Rougharse Racing said:

A Series 3 centre seat should fit, but I'm not sure that the lap-strap seat belt normally fitted to the Series 3 centre seat is particularly safe.

Click to expand...

I’ve been looking for one of these but not had much luck.

 

Rougharse Racing

Well-Known Member

• Nov 29, 2017

• #5

I had been looking into fitting a centre seat to mine, but I'm not happy using just a lap belt and can't see any way of fitting a conventional lap and diagonal belt.
I have also moved the driver's seat inwards by 1" as per later Defenders, which has reduced the space available for a centre seat, but does make a significant improvement to elbow to door room.

 

14platoon

Active Member

• Nov 30, 2017

• #6

Rougharse Racing said:

I had been looking into fitting a centre seat to mine, but I'm not happy using just a lap belt and can't see any way of fitting a conventional lap and diagonal belt.
I have also moved the driver's seat inwards by 1" as per later Defenders, which has reduced the space available for a centre seat, but does make a significant improvement to elbow to door room.

Click to expand...

Yeah I did think just a lap belt wouldn’t be sufficient.

 

D

Downsy

Member

• Dec 1, 2017

• #7

As my Tithonus has the roll cage I was able to use it to mount a three point belt for the centre seat.