alarmfitter
New Member
Any info on removing the drivers arm rest so I can have it retrimmed would be helpfully 
holidaychicken
Well-Known Member
Any info on removing the drivers arm rest so I can have it retrimmed would be helpfully
Don't know how to remove it but i reconditioned mine in place, is yours torn or just scuffed?
alarmfitter
New Member
It's torn on the end
ScotsJamie
New Member
There is info in the workshop manual about removal of the armreast I think.
Mine is quite loose when leaned on, so I need to look into this too.
Mine is quite loose when leaned on, so I need to look into this too.
holidaychicken
Well-Known Member
ok, mine was scuffed on the side and on top so i repaired it with a leather treatment matched to the land rover colour which worked well but not for tears or rips unfortunately..
alarmfitter
New Member
Thanks for the replys
holidaychicken
Well-Known Member
get yourself a copy of the repair manual, i bought a disc of egay for a couple of quid but think you can download, i think they refer to it as RAVE.
below is all i could find in the manual
below is all i could find in the manual
alarmfitter
New Member
Cheers for that
holidaychicken
Well-Known Member
no bother, good luck
alarmfitter
New Member
I will take some pictures if I have a go at it
