denis the menace

Active Member

• Apr 7, 2020

• #1

hi all I’m am cleaning up my arms fwh but cannot seem to be able to find the correct size for the screws that hold it in they are slightly smaller than 4mm and 13mm long. I have found them for the later ones but these are too long and are shamfered. Can anyone help

 

denis the menace

Active Member

• Apr 7, 2020

• #2

Sorry avm freewheeling hubs

 

C

Citizen Kane

Well-Known Member

• Apr 7, 2020

• #3

No10 24 UNC, once you get some new screws you can stick the FWH on ebay and make them someone else's problem.

 

R

rob1miles

Well-Known Member

• Apr 7, 2020

• #4

Mine are Warn and I think they too have 10-24 with a taper on the head so that may give you another option for spares.

 

denis the menace

Active Member

• Apr 8, 2020

• #5

Thanks but are these not for the later ones as mine are not shamferrd and are only 13mm

 

C

Citizen Kane

Well-Known Member

• Apr 8, 2020

• #6

Are you saying that your screws are not 10 24? have you measured them, what TPI are they, is the OD you measured accurate, if they are genuinely less than 4mm OD then they clearly wont be 10 24 or even 8 24, would be really surprised if they are not a UNC number screw.