T

Taurai

New Member

• May 1, 2018

• #1

When i turn on my freelander 1.8 petrol 2001 model it raises idling to about 2 then it suddenly drops and cuts off, it only normalizes after 3 or 4 trials. When driving it suddenly loses power and when changing to high gears it starts jerking and sometimes when changing down it behaves like all pipes are closed and it loses power and sometimes cuts off

 

htr

Well-Known Member

• May 1, 2018

• #2

Could be several things: lack of power while driving / cutting out point to a fuelling problem. The fuel filter or pump itself could be on its way out. Problem idling could be the IVAC valve requiring a clean. Some use WD40... I use aerosol carby cleaner .

 

Stuart hall

Active Member

• May 1, 2018

• #3

htr said:

Could be several things: lack of power while driving / cutting out point to a fuelling problem. The fuel filter or pump itself could be on its way out. Problem idling could be the IVAC valve requiring a clean. Some use WD40... I use aerosol carby cleaner .
View attachment 148009

Click to expand...

Plus he's in Zimbabwe so could be different set up ?

 

T

Taurai

New Member

• May 10, 2018

• #4

I have installed a new fuel pump and now the problem of lack of power seem to have disappeared but the problem of idling is still there, can you please assist on how to clean the IVAC valve, Thank you so much for the advise

 

htr

Well-Known Member

• May 10, 2018

• #5

The IVAC is shown in the pic I posted above. Pull the rubber hose off and spray the carburettor cleaner into the IVAC [ not the throttle body] while the engine is running, reconnect pipe. Have a look at this video on youtube to about resetting the TPS when their is an idling problem - it may be the same with the freelander. [ click on the green text - it's a link to youtube]

my bad - IACV Inlet Air Control Valve

 

Last edited: May 10, 2018

T

Taurai

New Member

• May 10, 2018

• #6

okay thanx a lot let me try it