Hi ZDomZ who is Diesel do can you point me in the right direction so I can talk with them. Thanks Buddy.
Hippo
Lord Hippo
Land Rover Zone - View Profile: Diesel Do
You have the option of sending him a pm (private message) or he'll be along in a bit. He log's in regular so may see this post.
You have the option of sending him a pm (private message) or he'll be along in a bit. He log's in regular so may see this post.
Hi there No Dosh hat is most kind of you. I wish I was in the SW but I live in the very North of Scotland North of Inverness. I think that may be a bridge too far. thanks for such a kind offer
Diesel Do
Well-Known Member
Van floor won't fit with car side panels. Van side panels won't fit with rear upper seat mounts welded on. Bulkhead supports the front of the floor where it overhangs the rear foot wells. I fitted the full van interior. Wooden floor, rubber mat, lashing eyes, 2x side panels and bulkhead. Only mod you have to make is cut off the upper seat mounts on the strut towers. This means it's not easy to reverse.
ZDomZ
New Member
If it has no ask windows I gues it was a van and has had the car cob version done to it! If you want to retain the ability to refit the seats later and are not bothered about the panel being different I would get a van partition to support the front edge of the floor and use a big bit of cardboard or several taped together to make your own template.. You can then cut this from a sheet of decent ply and fit it in around the car side panels. Unbolt the tiedowns and drill through your new floor panel to bolt them back in, if you got some more from a scrap yard you may be able to use the seat mounting holes to add extras if you need.
Diesel Do, Thanks for your post. It is a freelander van and had rear seats fitted after market. All the seat struts are out. And it has the van interior side plastic panels. Please can you tell me Where I can get a bulkhead from to support a new floor and do you know a supplier that might be able to help me.
Kind regards
Kieran
Diesel Do
Well-Known Member
I got a complete van kit off eBay for £50. All bolted straight in Appart from cutting off the seat mounts
