H

highlander2302

New Member
Hey landy brothers and sister in need off some help I recently changed the wheel bearings on my landy 1 back 1 front without a press and a few broken bearing I eventually managed to get them in all nice and snug bolted and she runs perfect no rumbles tremor whines smooth running the issue is I can't seem to get the abs senors right keeps saying contact too low or missing and cause the wheels to lock up when I get the speed up what am I missing
 
highlander2302 said:
Hey landy brothers and sister in need off some help I recently changed the wheel bearings on my landy 1 back 1 front without a press and a few broken bearing I eventually managed to get them in all nice and snug bolted and she runs perfect no rumbles tremor whines smooth running the issue is I can't seem to get the abs senors right keeps saying contact too low or missing and cause the wheels to lock up when I get the speed up what am I missing
Click to expand...
Did you fit the correct bearings, and fit them the correct way round? Also did you damage the very delicate magnetic flux rings on the bearings?
A press is the only safe way to fit bearings, and then they need pressing in with the correct spacers to avoid damage. I changed 2 last weekend, which takes about 15 minutes per side, with the correct pressing procedure.
 
As above. What caused the damage to the first bearing fit? For example or impact in the wrong place will damage the bearing, abs magnets or both.

15 mins when the hub is off the car John !! :)
 
Nodge68 said:
Did you fit the correct bearings, and fit them the correct way round? Also did you damage the very delicate magnetic flux rings on the bearings?
A press is the only safe way to fit bearings, and then they need pressing in with the correct spacers to avoid damage. I changed 2 last weekend, which takes about 15 minutes per side, with the correct pressing procedure.
Click to expand...
Hi thanks for the reply after revision I realised I ****ed up by not pressing them in they were tap in with hammer and wood there's no obvious sign off damage but since I posted im having to change bushes and drop link ball joints few others things and have got new bearings and will change them too by pressing them in also the brakes needed bleeding would that have cause the abs to act up and send warning code
 
Bleeding the brakes will likely not resolve the abs issue.
As suggested already, it’s likely you damaged the abs sensor / magnet.

When you say ‘the wheels locking up’, do you mean because the abs is not working now?
 
When I put it all together and drove off got to maybe 20mph and the tree amigos started flashing and the wheels not so much locking up just the brakes were fluctuating had to keep my foot lightly pressed on the brake peddle to stop the fluctuating then few moments after the warning lights stayed on it stopped fluctuating and I got back home
 
Got another issue been having for a while can't seem to figure it out short circuit to the boost solenoid cause poor acceleration at the start but once I'm up above 40 she runs perfect
 
You must log in or register to reply here.

Similar threads

V
2 amigos ABS and TC light L314 freelander 1 (not solved) (new)
Replies
10
Views
1K
Veslav
V
P
2010 Freelander will not start after a few fuses were pulled and re fitted!
Replies
0
Views
722
ped160
P
M
Mark 1 Freelander TD4 AUTO SPORT
Replies
2
Views
615
damian46
damian46
A
Freelander 1 td4 BCU
Replies
0
Views
603
Alby54
A
A
Freelander 1 td4 2002 BCU.
Replies
2
Views
744
Alby54
A