teddywood1 · Jan 29, 2018

well I was more than happy today after having many little problems it was time to take my beloved car in for its MOT and NO advisories just a strait pass well pleased i always have my car washed and cleaned I think it helps, but the mot man told times they are a changing for a lot of new rules are coming in soon you have been warned.

GrumpyGel · Jan 29, 2018

If the new regs include needing all the original emissions equipment installed and working (eg cats and EGR) - then there will be 1,000s of Landies scrapped - probably 1/2 of all currently roadworthy Freelanders and Discoveries!

dog-man · Jan 29, 2018

Any idea when these new regs, whatever they may be come into effect?

digby · Jan 29, 2018

Same thing happening over here in France soon 2018 ?) - will probablly have to disconnect Synergy for the test

teddywood1 · Jan 29, 2018

I will try to find out for you but I am sure they will be on site soon one includes if you have a tow bar on the back and it includes electric sockets for more than 7 pins they have to be tested oh how I wish I had a good brain they I could remember some of the things I was told but 1 I remember is emissions are changing a freelander must be no more than 3 percent .I think mine was 1.2.

Tannaton · Jan 30, 2018

It's May that things are changing, I posted a link a few days ago, it's been widely done on other forums.

FYI the trailer lighting socket is already a testable item if it is a 13-pin one.

I've already bought a EGR valve and pipe for my Disco on e-bay whilst you can still get them....

Other major changes are instant fail of LED or HID lamps conventional headlights (regardless of if the beam pattern is ok).

Plain silly items are a fail if the brake fluid is contaminated - but they're not allowed to remove the reservoir cap!

Also non OEM exhausts that are noisier than standard should now fail under a new "nuisance" category.

Nodge68 · Jan 30, 2018

Tannaton said:
It's May that things are changing, I posted a link a few days ago, it's been widely done on other forums.

FYI the trailer lighting socket is already a testable item if it is a 13-pin one.

I've already bought a EGR valve and pipe for my Disco on e-bay whilst you can still get them....

Other major changes are instant fail of LED or HID lamps conventional headlights (regardless of if the beam pattern is ok).

Plain silly items are a fail if the brake fluid is contaminated - but they're not allowed to remove the reservoir cap!

Also non OEM exhausts that are noisier than standard should now fail under a new "nuisance" category.

It'll be interesting.

I'm wondering if LED light bars will be included in the test. Maybe they need to be separately switched, instead of coming on with main beam.

My exhaust is slightly louder than the factory back box too, but it's not really noticeable.

DanClarke · Jan 30, 2018

Makes me so very happy that my relative is my MOT tester of all my cars.

Tannaton · Jan 31, 2018

Nodge68 said:
It'll be interesting.

I'm wondering if LED light bars will be included in the test. Maybe they need to be separately switched, instead of coming on with main beam.

My exhaust is slightly louder than the factory back box too, but it's not really noticeable.

The current MOT test covers only the statutory vehicle lighting system, so additional lights would only be a fail if they were the wrong colour. I haven't seen anything in the new draft to indicate any change to that.

teddywood1 · Feb 1, 2018

I have a switch in line to switch my over head one off should I need to while the main beam is on

teddywood1 · Feb 7, 2018

a couple of more points on MOT it will be a no no for EGR blocked off and NO led lights when they were not fitted as original

The Mad Hat Man · Feb 7, 2018

teddywood1 said:
a couple of more points on MOT it will be a no no for EGR blocked off and NO led lights when they were not fitted as original

?????? not fitted as original????

dog-man · Feb 7, 2018

Surely LED lights in cab and boot area won't be a fail?

blue beasty · Feb 7, 2018

dog-man said:
Surely LED lights in cab and boot area won't be a fail?

Just applies to headlights as far as in aware

teddywood1 · Feb 7, 2018

As BB said but also any on the out side of vehicle but I think light bars are exempt number plates have to have proper spacing

Nodge68 · Feb 7, 2018

blue beasty said:
Just applies to headlights as far as in aware

From the reading I've been doing, I think it appears to cover all E marked light assemblies. So this implies indicators and tail lamps too.

Stuart hall · Feb 7, 2018

Find a good mot station run by
David blunkett and stevie wonder !
Or grease palms usually works for me.

saxavordian · Feb 7, 2018

Mine due on the 13 Feb and getting repaired after that due to the full service picked up areas that would fail the MOT. I ordered the parts from Rimmer Bros so at least the cost will be on just labour only. Just goes to shows how much certain parts cost. Brake Pipe from ABS unit to Brake cost more than buying a kit itself.

Stuart hall · Feb 7, 2018

Don't get caught out guy's, remember if you take it in early and it fails it fails on that date and NOT the later date.
They're made millions from that.

kernowsvenski · Feb 7, 2018

Years ago, in my semi boy racer days I had a 405 Mi16. I fitted some yellow running lights to the sides of the front and rear bumpers, a bit like some Volvos had, and US spec vehicles have. One MOT guy failed them because they were non standard. It was about 1997/98. Not really relevant but I thought I'd mention it.

Well-Known Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Leaks an prone to bits dropping off

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Similar threads