MJI

MJI

Well-Known Member
Top of inner wing underneath reservoir and abs thingy.

Was not there a few months ago.

What is best repair?
 
Is it just surface rust or holed?

If it doesn't need welding, good wire brush/flap disc then scrub some rust converter in with a short stiff brush. Prime, paint and waxoil/lanoguard etc
 
1988smithy said:
Is it just surface rust or holed?

If it doesn't need welding, good wire brush/flap disc then scrub some rust converter in with a short stiff brush. Prime, paint and waxoil/lanoguard etc
Click to expand...
Not sure but will drop some rust converter in asap
 
MJI said:
Not sure but will drop some rust converter in asap
Click to expand...
Give the whole area a tap with a small hammer or wide, blunt screwdriver first. If it sounds dead and there's delamination or holes appear you'll have to weld. Hopefully you get a decent ringing sound.

Rust converter needs overcoating ASAP
 
1988smithy said:
Give the whole area a tap with a small hammer or wide, blunt screwdriver first. If it sounds dead and there's delamination or holes appear you'll have to weld. Hopefully you get a decent ringing sound.

Rust converter needs overcoating ASAP
Click to expand...
Only got some tools with me
 
MJI said:
Top of inner wing underneath reservoir and abs thingy.

Was not there a few months ago.

What is best repair?
Click to expand...
If its gone there, then you need to pull of the sound proofing and have a look, rusty bulkhead is a known trouble spot.
 
You must log in or register to reply here.

Similar threads

Roving4life-
Engine Cooling Issue - Thermostat ?
Replies
6
Views
952
Roving4life-
Roving4life-
B
1996 Land Rover Discovery 300TDi Restoration
2
Replies
35
Views
3K
oceans1
O
P
Paintwork
Replies
6
Views
872
dag019
dag019
K
immobilised disco 2, no EKA
Replies
1
Views
472
Landmark2
Landmark2
R
Engaging Gear
Replies
7
Views
867
Alibro
Alibro