fanatic · Nov 23, 2010

looking at fitting a 32 valve quad cam 260-290 bhp lump.

looking to use lexus engine and gearbox and mating it to lt230

storm99 · Nov 23, 2010

Before breakfast?

juiceyv8 · Nov 23, 2010

Pikey

y the slitty lump??

fanatic · Nov 23, 2010

A decent rover v8 with same power too expensive and hopefully scrapping a lexus ls400
been done in UAE and Australia

juiceyv8 · Nov 23, 2010

GM LS2 lump??

fanatic · Nov 23, 2010

juiceyv8 said:
GM LS2 lump??

Sure if your paying

Reckon I can do the engine and conversion (mate at machine shop) £500-600 by time I bin the lexus bits via ebay etc

Adz · Nov 23, 2010

fanatic said:
hopefully scrapping a lexus ls400

Like it

I hope to scrap a few of those too...

fanatic · Nov 23, 2010

Adz said:
Like it I hope to scrap a few of those too...

Shame really the car has mot and tax,but outside scruffy, may even do a topgear sofa

juiceyv8 · Nov 23, 2010

fanatic said:
Sure if your paying

Reckon I can do the engine and conversion (mate at machine shop) £500-600 by time I bin the lexus bits via ebay etc

not even 2nd hand??

fanatic · Nov 23, 2010

juiceyv8 said:
not even 2nd hand??

lexus has near full service history and complete car will be easier to transfer loom etc from. Reading on INTERNET it appears a shaft and 16mm plates required to mate to gearbox.

Also in the un likely event there is an issue stripping it will give good return on it.

juiceyv8 · Nov 23, 2010

fanatic said:
lexus has near full service history and complete car will be easier to transfer loom etc from. Reading on INTERNET it appears an shaft and 16mm plates required to mate to gearbox.

Also in the un likely event there is an issue stripping it will give good return on it.

See ya point. and its something different. you gonna leave it N/A or super/turbo/N2o it??

fanatic · Nov 23, 2010

juiceyv8 said:
See ya point. and its something different. you gonna leave it N/A or super/turbo/N2o it??

in a 90

N/A will be fine

juiceyv8 · Nov 23, 2010

fanatic said:
in a 90 N/A will be fine

LOL

worth a look.

fanatic · Nov 23, 2010

juiceyv8 said:
LOL

worth a look.

Can you supply me an anchor?

juiceyv8 · Nov 23, 2010

fanatic said:
Can you supply me an anchor?

Dont have one in stock. special order from Harland & Wolf

fanatic · Nov 23, 2010

Think the drum brakes on rear will need to go too

juiceyv8 · Nov 23, 2010

fanatic said:
Think the drum brakes on rear will need to go too

your wanna stop in feet not the next village.

fanatic · Nov 23, 2010

juiceyv8 said:
your wanna stop in feet not the next village.

Correct, will have to consider my options-disco rear axle for a start and
pad/disc upgrade if not calipers as well.

juiceyv8 · Nov 23, 2010

fanatic said:
Correct, will have to consider my options-disco rear axle for a start and
pad/disc upgrade if not calipers as well.

find some cheap 2nd hand 4pots and get caliper carriers made up cheap

Adz · Nov 24, 2010

Disk upgrade to vented or to bigger ones?

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Spreading Joy & Harmony

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

New Member

New Member

Similar threads