Boris113

Well-Known Member
All of the lights on the front of the 90 are in a bad way, with worn bulb holders and broken backings.

A friend of mine has volunteered to rewire the vehicle in exchange for repainting his tractor, but whilst he does it it seems an ideal to change all of the light units.

I've bought a set of NAS lights for the rear, but want to fit TD5-style front indicators and side lights. These are the ones which attach to the body with 2 screws and use the econoseal connectors on the back - is any extra work required to fit them (other than appropriate connectors) or is it plug and play?

I would also like to change the indicators to this type:

DEFENDER 90 110 TD5 SIDE REPEATER INDICATOR LAMP XGB000030 | eBay

Does anyone know what connector/fixings they would use?

Thanks in advance,

Harry
 
All of the lights on the front of the 90 are in a bad way, with worn bulb holders and broken backings.

A friend of mine has volunteered to rewire the vehicle in exchange for repainting his tractor, but whilst he does it it seems an ideal to change all of the light units.

I've bought a set of NAS lights for the rear, but want to fit TD5-style front indicators and side lights. These are the ones which attach to the body with 2 screws and use the econoseal connectors on the back - is any extra work required to fit them (other than appropriate connectors) or is it plug and play?

I would also like to change the indicators to this type:

DEFENDER 90 110 TD5 SIDE REPEATER INDICATOR LAMP XGB000030 | eBay

Does anyone know what connector/fixings they would use?

Thanks in advance,

Harry



This type of side repeater clips into place, there's no fixing screws or friction bushes, like on the earlier types.

The hole in the wing has to be cut to an exact shape.

Someone posted this template on another forum -

side_repeater.jpg




They use these connectors -

DEFENDER TD5 / PUMA - Central Locking - Rear Side Doors Connectors and Terminals | eBay

$(KGrHqNHJ!0E8e7WbRnkBPPo-mfb(!~~60_12.JPG





Or, if you want them pre-crimped and assembled to pigtails, with inline splice crimps -

Connector Repair Harness - Side Repeater Wing Indicator - XGB000030 / XGB100310L | eBay

$(KGrHqR,!r!F!-Voi0LuBQh+jFRpU!~~60_12.JPG


.
 
Last edited:
Thanks Paul, this looks very precise and not an item I can make fit with a hammer, I might wait until I replace the dented wings with newer ones that already have the correct holes :)

Anyone know about the sidelights/front facing indicators and their fixings?

Cheers, Harry
 

Similar threads