Thanks for that, I thought as much.Leave it to the experts, expensive if it goes wrong
The YouTube vids are good but quite often there are some things edited out and I know a youtuber who regularly edits out the extra pair of hands needed or the bit where he takes it to the garage to fix his mistake then edits it to look right for final video.
I'll have a word with him see if he did if so i'll get them posted
Well I bit the bullet and gave it a go and it’s come out ok, the hardest part was removing the rear side windows as they were bonded and not riveted to the vehicle (I used a large fairly flixible sharp kitchen knife to cut the mastic bonding them and although I caused a few scratches around the window I was happy as I knew they would be covered by the new glass.
No, it's the 4' X 18" massive side window.
I’m going to use that method on the back door
It’s not fallen off yet so I’m well pleased, thanks.Well done, that turned out nice didn't it
Hello there, size wise it fits the panels really well with probably only a millimetre around the edge and it’s probsbly only about 3mm thick so doesn’t stick out noticeably. I will take some more photos and post them.
