Also seem to remember seeing on the lift kit instructions a black box gizmo underneath the rear drivers side panel in the boot which is apparentley fitted to certain models for tow bar use. Haven't got one in mine so I don't know what it is called or what you'd have do if its not there
Hi Shotgun ,its quite a simple job i think most earthling could manage it,it is quite heavy so ya might need an assistant, the leccy bit to me was easy peasy but then i'm a rocket manShotgunDrew said:
,got mine orft e bay some years ago mind, and the company was tow equipe or summit,very good all the correct destructions and wiring, but remember if ya buy private,ta check the bolts holdin the tow hitch,must be high tinsile type,best oh luck. . .
The ball releases leaving the cross bar in place.
- looks like it cud be a romsey job if thats ok, unless yu need it fust?
Shotgun ,it will take a morning ta fit ,and yes all the holes are there ya might have ta prod round ta find them,pit sorry ment tip. . .spray all pre taped threads wiv wd40 and run the bolts through it first,the wiring is all on the rear rhs as ya look in rear door ,undo the plastic bit on the floor 4 hex bolts,undo the rhs plastic cowell [bit of a fiddle but it will come orft] under that is all yer wiring, tip [2] you can at this stage poke ya cable through a grommet at the bottom and crimp splice or connectors,but for bout £14 lr can get yer a made up connector to just push in[this is never sold by the tow ball companys] i feel this is the best method as it then uterlises the cars internal instruments,however as far as i know lr never supplyed a aux 12v supply used for some caravaners for a constant power supply. . .best oh luckShotgunDrew said:Looks like a job for a Bank Holiday weekend to me...
The Mad Hat Man said:caint ya use the tow bar then?
yo file is still being transmitted - 4hours now
should be fun. Tried tightening the bearing but its not going anywhere. Not surprising as it not a tapered bearing. Gonna have ta look for mech to do it now I have the part
ming said:
The Mad Hat Man said:
Will look for the stall with the red and white car Hopes theres not too many type blokey on wednesday.Then I can go try break it again on sunday at Bognor
pompey-john said:My work takes me up that neck o' the woods often, let me know where ya are if ya likes, but Monday will be good
Anyways wheel bearing booked in to be fitted by a preeefurshinal
The Mad Hat Man said:
