T55
go to halfrauds - borrow one and check it int car park 
.
.
go to halfrauds - borrow one and check it int car park
My mate next door should have one if I know the size, he's got some vice grips, stilsons and a flippin big hammer so he can do anythin.
waldershelf
Well-Known Member
Did you make the cardinal error and drain off the oil before loosening the fill/level plug? OOPS!!
Yup, done that...
Bought a T55 half inch drive socket for three pound odd locally so that did the trick. Thing is, I'm sure the one I cant find that fits Pug heads is the same size, it's in a tool box somewhere.
Any way, all oils drained out now ready for new stuff, I've got ATF for the R380 gearbox and EP90 for the transfer box on the shelf so unless I hear otherwise then that's what is going in.
Hope I got the belt on the right way, dont seen to go any other way.
Attachments
waldershelf
Well-Known Member
ATF dexron 11 and EP90 is whats in mine and what I put in a mates just this morningYup, done that...
Bought a T55 half inch drive socket for three pound odd locally so that did the trick. Thing is, I'm sure the one I cant find that fits Pug heads is the same size, it's in a tool box somewhere.
Any way, all oils drained out now ready for new stuff, I've got ATF for the R380 gearbox and EP90 for the transfer box on the shelf so unless I hear otherwise then that's what is going in.
Hope I got the belt on the right way, dont seen to go any other way.
discoboy84
New Member
my landy garage says ATF is fine!
jamesmartin
Well-Known Member
atf is fine they only put in mtf to extend service intervals i would rather use dextron 2 atf and change every year or 10000 miles ,as its alright having syntehtic long life oil but you also need to drain crap out else you be running highly lubricative grinding fluid
I think it’s 1/2” bsp
