Hi Brian

Welcome to the forum, there are people on EBay that will supply and fit it for you if you want, hope this helps.

Cheers Kaz
 
martynv8 said:
2.0 hippo on here has done his twice i think, will probably be along shortly to advise. :)
Click to expand...

+1, also put your location in might be somewhere local,there is someone close to me doing them £3500 all in I think,look stunning & was tempted but im prob only keeping mine another 2 years so it wont be worth nothing then:eek:
 
Last edited:
If you ok with spanners theres loads on ebay
Even if your not I would still source them from there then have a bodyshop fit/paint it
 
gfromleeds said:
If you ok with spanners theres loads on ebay
Even if your not I would still source them from there then have a bodyshop fit/paint it
Click to expand...


spanners ??? lol

more like good with the angle grinder.

also need to be on top of your electrical knowledge. ;)
 
there are companies that can sell you a kit.

either fully fitted or just as parts.

theres alot more to it then just the parts in the kit.

you would need to get round the wiring (which i sorted myself with some clever electricary... and with the help of the programming features on my faultmate extreme)

otherwise you will need to purchase the wiring kits and have pay for an auto electrician to install.


wouldn't attempt fitting this yourself unless your good with your tools and have a good idea on whats involved.


hope that helps
:)
 
I am handy with cars fitted lots of engines and fitted different looms in to different cars just need to find a kit to buy I live in essex can anyone guide me in the right direction
 
Are you after a 2006 supercharged look facelift or a 2010 onwards facelift ?

As there's a big difference in cost and installing !
 
I'm looking at doing the 2010 facelift to my 2003 HSE. I've sourced parts on EBay. Headlights £437 each. Grill £105. Headlight connectors £72. Front and rear bumpers with side grills etc £360. The car will be getting re wrapped but the bumpers are in the white wee going for.
You say a grinder is required? Is this for the headlamps to fit?
 
Yes a bit of body work is needed with the use of a grinder to get everything to fit nicely.

Why did you buy a new 2010 bumper ? As the standard 2010 bumper is the same as the early ones fitted to all L322's
 
2.0_hippo said:
Yes a bit of body work is needed with the use of a grinder to get everything to fit nicely.

Why did you buy a new 2010 bumper ? As the standard 2010 bumper is the same as the early ones fitted to all L322's
Click to expand...

I thought the early bumpers are straight along the top and the 2010 have the dip in the middle where the grill sits?

regarding the grinder, if you can find wheeler dealers where they face lifted an early l322 you can see ed taking a grinder to the front wings to remove a thin slice to allow the lights to sit back
 
You must log in or register to reply here.

Similar threads

G
L322 2009
Replies
4
Views
434
1988smithy
1988smithy
allanw
L322 TD6 DIAGNOSTIC LOG IN. HOW TO. VIA BMW
Replies
1
Views
450
Mark Piercy
Mark Piercy
Dar ran Dar ran
Freelander 1 facelift 3 door rear seat covers
Replies
0
Views
415
Dar ran Dar ran
Dar ran Dar ran
D
Extra video monitor
Replies
4
Views
386
Datatek
Datatek
Swl26
Freelander 1 Driving Lamp Query
Replies
8
Views
721
Dar ran Dar ran
Dar ran Dar ran