B

Barking Mat

New Member

• May 31, 2024

• #1

Evening, new member, acquired Wednesday, a 2004 Freelander, 2.0 Diesel, Jatko auto box, LHD for really not alot, told clutch was dead.

Occurred to me they don't have a clutch, got it home on a lowloader, drained gearbox, one litre of brown muck came out, put three litres of Dexron 2 in it, works a treat.

Apparently needs to be N204 of ATF204 ?

So I think that's Dexron 3, can anyone confirm that please?

Thanks in advance.

 

B

Barking Mat

New Member

• May 31, 2024

• #2

Wow, I get a trophy for my first message, whoop !

Is this a dead forum ?

 

Graculus

Well-Known Member

• May 31, 2024

• #3

Nope, but I think you've already answered your own question... https://www.mig-welding.co.uk/forum...elander-yay-or-nay.137438/page-6#post-2446785

 

saxavordian

Well-Known Member

• May 31, 2024

• #4

 

B

Barking Mat

New Member

• May 31, 2024

• #5

Looking for confirmation on what oil goes in the gearbox.

 

Graculus

Well-Known Member

• Jun 1, 2024

• #6

It needs to meet specification JLR M1375.4 , original part number is STC53016 which superseded to STC 4863 ->TYK500050,
Equivilents are:-

reCAPTCHA Verification

Castrol Transmax ATF Z

https://www.castrol.com/en_gb/united-kingdom/home/car-engine-oil-and-fluids/motor-oil-and-fluids-finder.html?page=recommendedProducts&id=9873

 

B

Barking Mat

New Member

• Jun 1, 2024

• #7

Graculus said:

It needs to meet specification JLR M1375.4 , original part number is STC53016 which superseded to STC 4863 ->TYK500050,
Equivilents are:-

reCAPTCHA Verification

Castrol Transmax ATF Z

https://www.castrol.com/en_gb/united-kingdom/home/car-engine-oil-and-fluids/motor-oil-and-fluids-finder.html?page=recommendedProducts&id=9873

Click to expand...

Thank you.

 

B

Barking Mat

New Member

• Jun 1, 2024

• #8

Barking Mat said:

Thank you.

Click to expand...

 

marjon

Well-Known Member

Full Member

• Jun 1, 2024

• #9

Graculus said:

Nope, but I think you've already answered your own question... https://www.mig-welding.co.uk/forum...elander-yay-or-nay.137438/page-6#post-2446785

Click to expand...

Sound like a real rough bunch on LZ

Oh and welcome Mr @Barking Mat
If you had read the destructions on the tin you would have realised this is the say hello folks and all the tech stuff/questions are mainly contained in the relevant section.

J

 

kermit_rr

Very

Full Member

• Jun 1, 2024

• #10

Hi and welcome to the zone

 

brianp38dse

Well-Known Member

• Jun 3, 2024

• #11

Hello and welcome