Nice one Jon looks a decent buy, put the tranny box on from the disco, put in some sound insulation and that alone will make it far better to live with. if its got no headlining let me know i got plenty of foam and some dark grey cord carpet getting in my way, your welcome to it.
More picture, soon as .
 
wickford90 said:
Nice one Jon looks a decent buy, put the tranny box on from the disco, put in some sound insulation and that alone will make it far better to live with. if its got no headlining let me know i got plenty of foam and some dark grey cord carpet getting in my way, your welcome to it.
More picture, soon as .
Click to expand...

The disco is going complete I hope, I need to get rid asap to get some cash back, will lose out on a bit of money but it saves me stripping and selling in pieces. I might look out for a new box, 1st has popped once or twice so not sure on that one, it may be me driving it...

as for roof lining, im not sure what im gonna do yet, I may buy one of the soundproofing kits for it, not sure if they are worth it. Hopefully it will be ready for next weekend so maybe do some laning soon?
 
Nice one John looks a good un;) you will get used to the noise and rattles of a fender trust me, it's just that your used to the comforts of the disco, get all your bits sorted out and we will arrange a days lanning maybe next sunday if anyones up for it, once again well done you now have a cool landy;):D

Ps if I remember you had all the extreme 4x4 suspension on your disco, if I where you I would swap most of it over to the fender and put the fender stuff onto the disco before you sell it
 
Well done Jon, welcome to the other side.
I've been busy, change my front axle yesterday after work. I'm now starting to feel my age. Just got a few thing's to finnish off, loctite a few bolts, steering guard oh ya put on my new Dyneema.:D
 
666 george said:
Well done Jon, welcome to the other side.
I've been busy, change my front axle yesterday after work. I'm now starting to feel my age. Just got a few thing's to finnish off, loctite a few bolts, steering guard oh ya put on my new Dyneema.:D
Click to expand...


nice one graham what did the Dyneema cost and where did ya get it mate? oh and did ya get the winch sorted then?
also been working in the rain today under a sheet of tapauline, got me td5 heater box fitted what a pain in the ass that was and also got me poly bushes fitted on the front radius arms aswell so all done know, but im now looking to see what i can upgrade next:D its never ending.
 
I really need to buy more for mine and get the bloody bulkhead built up!
I'm missing out lol
 
wangie46 said:
Dyneema cost and where did ya get it mate? oh and did ya get the winch sorted then?
Click to expand...

Winch it, off ebay. Comes from netherlands not china. Got it for £143.
Yes got the winch sorted, the frame that holds the brushes just needed cleaning up as it is bolted tho the outter case.
 
wangie46 said:
Ps if I remember you had all the extreme 4x4 suspension on your disco, if I where you I would swap most of it over to the fender and put the fender stuff onto the disco before you sell it
Click to expand...

i had a look on the fender and its the same stuff, same shocks, turrets e.t.c so not gonna bother, cant use the springs so no point doing the rest if its the same! Gonna swap me battery over as its near enough new, gonna take me winch of an all.
 
Anyone know a decent auto sparks, need the wiring behind dash tidying up, it's got a bit messy over the years with bits added.
Wickford / Basildon area.
 
T&M auto in colchester is best in the area, they will be able to sort it no problem but it will be pricey, do some of it yourself first, get rid of old wiring and trace as much as you can, will save money, also take trim bits off first and tell them you will refit, that can save an hours labour...

Im gonna be going through mine, it looks pretty standard but its as open as the old beetle wiring, i imagine a few connections are poor...
 
Jongould said:
T&M auto in colchester is best in the area, they will be able to sort it no problem but it will be pricey, do some of it yourself first, get rid of old wiring and trace as much as you can, will save money, also take trim bits off first and tell them you will refit, that can save an hours labour...

Im gonna be going through mine, it looks pretty standard but its as open as the old beetle wiring, i imagine a few connections are poor...
Click to expand...

Cheers mate will give them a ring.
Just sent pm re a guy looking for disco off roader
 
Well I have had the 'fender in at work today and had a decent look over it, the engine has an oil leak around the filter housing so will neede to sort that, also the transfer box has got a few leaks so gonna clean that up and see whats what. I decided to fit my wheels off my disco to it as they have better tyres and its a set of 5 not 4. When I swapped them I found I had a set of decent spacers on it as well so thats another little bonus!

Im gonna change all me oils tonight, prob pop off the hubs and see what the bearings are like, have a little clean up, fit my CB and battery from the disco and then its just wait for my snorkle and wading kit and im ready... oh yeah and that poxy tax as well, I only just taxed the disco 2 weeks ago an all!!!

Couple more pics with my wheels:
486199_10150923259282374_985801909_n.jpg

529498_10150923257402374_1936482989_n.jpg


The wing tops look like people have been jumping on them, I will have to sort that out soon, will take them off at some point and straighten them...
 
Last edited:
Jongould said:
Well I have had the 'fender in at work today and had a decent look over it, the engine has an oil leak around the filter housing so will neede to sort that, also the transfer box has got a few leaks so gonna clean that up and see whats what. I decided to fit my wheels off my disco to it as they have better tyres and its a set of 5 not 4. When I swapped them I found I had a set of decent spacers on it as well so thats another little bonus!

Im gonna change all me oils tonight, prob pop off the hubs and see what the bearings are like, have a little clean up, fit my CB and battery from the disco and then its just wait for my snorkle and wading kit and im ready... oh yeah and that poxy tax as well, I only just taxed the disco 2 weeks ago an all!!!

Couple more pics with my wheels:
486199_10150923259282374_985801909_n.jpg

529498_10150923257402374_1936482989_n.jpg


The wing tops look like people have been jumping on them, I will have to sort that out soon, will take them off at some point and straighten them...
Click to expand...

Far to shiny Jon, stick some checker plate on wing tops.
Did you manage to sell the disco.
 
Jongould said:
I decided to fit my wheels off my disco to it as they have better tyres and its a set of 5 not 4. When I swapped them I found I had a set of decent spacers on it as well so thats another little bonus!
Couple more pics with my wheels:
486199_10150923259282374_985801909_n.jpg
Click to expand...

Just a heads-up ... Check the front tyre fitments .. I'm pretty sure they are a directional tyre, so you might want to swap sides! :eek:
 
Paul D said:
Just a heads-up ... Check the front tyre fitments .. I'm pretty sure they are a directional tyre, so you might want to swap sides! :eek:
Click to expand...


Yeah I knew about that, I just whacked them on as I wanted to get pics of me disco, they had spacers on which I removed after as it looked gay, looked like its was straddling up the road, be ok with 12.5's but not 10.5's...

Anyone wanna buy a set of spacers? I have got them and a tow bar going, offers here before they go on eBay...
 
Jongould said:
Yeah I knew about that, I just whacked them on as I wanted to get pics of me disco, they had spacers on which I removed after as it looked gay, looked like its was straddling up the road, be ok with 12.5's but not 10.5's...

Anyone wanna buy a set of spacers? I have got them and a tow bar going, offers here before they go on eBay...
Click to expand...

how much?
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
1K
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
8K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
10K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
1K
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
3K
hoopfish
hoopfish