Big Stu 12
Well-Known Member
ok i need the near front passange electric mirro plz
You might be lucky brians know for his door mirror's,
You might be lucky brians know for his door mirror's,
Dirtneewbie
New Member
Lol might just be best to stay behind him thenYou might be lucky brians know for his door mirror's,
matthew2riches
New Member
Oh, I've just checked and it was the jacking kit bag :doh:
Dirtneewbie
New Member
Drat i will just have to keep looking then
Brian S
Well-Known Member
wickford90
Well-Known Member
Guy I am in Colchester Monday morning, wont have time to go to Matts but if someone wants to get it to me I will gladly drop it off to you on my way home.
Jonny357
New Member
ITS ALIVE, ITS ALIIIIIVE....
so i fixed my electric fan. With some 35 amp cable annd fuses. Crimped and Soldered all the connections, got it to suck as well (turns out it is permanent magnet) so fingers cross it carrys on working.
Going to run it WITH the viscous untill i can guarentee its reliable, then off with the viscous and bring on wales!
matt, i managed to remount my rad, just by taking the grill off rather than the whole front pannel, it was bloody fiddly and took me hours haha!
Just need to source some piping now and replumb and seal my snorkel woop!
so i fixed my electric fan. With some 35 amp cable annd fuses. Crimped and Soldered all the connections, got it to suck as well (turns out it is permanent magnet) so fingers cross it carrys on working.
Going to run it WITH the viscous untill i can guarentee its reliable, then off with the viscous and bring on wales!
matt, i managed to remount my rad, just by taking the grill off rather than the whole front pannel, it was bloody fiddly and took me hours haha!
Just need to source some piping now and replumb and seal my snorkel woop!
matthew2riches
New Member
A lot of faffing by the sounds of it
It should all be good now.I checked on a bug I did not so long ago and I used 17.5 amp cable with a 20 amp fuse in with a SMALL electric fan from a dual fan setup on a Ford.
That is where I went wrong with your wires :doh:
Still, no major hassle
wangie46
Active Member
Yipee I have disk brakes all round no more brown trouser syndrome when some one anchors up on front of me went to buy a 24 spline diff yesterday and they wanted 50nicker for a diff or 80 nicker for a complete axle and they also offered to fit for free so I though let em do it glad I did as my old axle did not want to come off, took all day to change and they had to use oxy and acetylene to cut some of the old one off no more clunking from the drive train now which is good as I thought I may need to change the gearbox at some point, so I'm well chuffed
Matt not to worry about the axle now, will give ya a tinkle next week sometime
no more brown trouser syndrome when some one anchors up on front of me went to buy a 24 spline diff yesterday and they wanted 50nicker for a diff or 80 nicker for a complete axle and they also offered to fit for free so I though let em do it glad I did as my old axle did not want to come off, took all day to change and they had to use oxy and acetylene to cut some of the old one off no more clunking from the drive train now which is good as I thought I may need to change the gearbox at some point, so I'm well chuffedMatt not to worry about the axle now, will give ya a tinkle next week sometime
matthew2riches
New Member
Yipee I have disk brakes all round
Matt not to worry about the axle now, will give ya a tinkle next week sometime
What do I need a tinkle for?
wangie46
Active Member
Co-Pang-Yang
Well-Known Member
Where did you get the axle from Wangie? Good price that.
matthew2riches
New Member
wangie46
Active Member
Place in Erith Kent they are called tdi breakers, don't think they usually fit but as I have bought me engine, tranny and both axles off them now they offered to fit it for me but still good for and disco bits if ya want their no let us know
666 george
Well-Known Member
Place in Erith Kent they are called tdi breakers, don't think they usually fit but as I have bought me engine, tranny and both axles off them now they offered to fit it for me but still good for and disco bits if ya want their no let us know
Thank god for that, anybody can go in front of you now & not have to worry.
Free fitting as well, can't be bad. May have to dig my 24 out of the garage & fit mine if a can be asked. But i'd better sort out me hole in the outrigger first & look at the fuel tank cradle as well.
matthew2riches
New Member
Still got my body mounts to finish bolting in and a few grommets to fit. I doubt I'll have time to fit sliders, tank guard, etc as I am now sorting something else a lot more important out. Also need to seal nooorkel and re-attach breathers.
I'll just have to watch what I do in Wales and go careful.
I'll just have to watch what I do in Wales and go careful.
Discodad
Well-Known Member
matthew2riches
New Member
Now, now Nick. I know you wanted a garage but did you not think your landy won't fit down the side of your house to get to the back???? Or are you going to cut the neighbours living room out
Or are you going to cut the neighbours living room out 
