Look like some real good lanes down there mate!, the bit next to the little foot bridge looked tight! also must have been nice to have ferns gently caressing your truck rather than hawthorns scratching the fook out of it like up here lol

Got another vid of a lane i done a couple of times didnt put it up cause it looked boring, its a lane about a mile long two foot narrower than a landy and all ferns the whole length. as it was ****ing down the second time i done it it.cleaned the motor a treat.
 
Some good videos ther geoff, was that a tidal river or fresh water?

Tidal, went one day and there was no water went back later the next day and two feet of water. Done it twice .it is actually about 3/4 mile long in all but the second part didnt have any posts showing the edge of the road, so gave it a miss.
 
Matt would like shot of the waffle boards, and i could do with the readies, any one that wanted them please let me know asap. If you have not collected them let me know for sure you want them and arrange collection. so i know how many i am lumbered with and how many i have to sell.
 
Another few hrs of grinding and welding on the disco today with the help of Matt we got the drivers side wheel arches done :):):):).

So we are getting there now, Just been out side undersealing the wing repairs and spraying the upper/inner surfaces.
 

Attachments

  • Photo0028.jpg
    Photo0028.jpg
    231.9 KB · Views: 193
  • Photo0029.jpg
    Photo0029.jpg
    215.6 KB · Views: 157
  • Photo0031.jpg
    Photo0031.jpg
    235 KB · Views: 160
  • Photo0032.jpg
    Photo0032.jpg
    216.9 KB · Views: 198
  • Photo0034.jpg
    Photo0034.jpg
    240.2 KB · Views: 188
Another few hrs of grinding and welding on the disco today with the help of Matt we got the drivers side wheel arches done :):):):).

So we are getting there now, Just been out side undersealing the wing repairs and spraying the upper/inner surfaces.

Did you spend more than 5 minutes on the paintwork this time :confused: :rolleyes:
 
Did you spend more than 5 minutes on the paintwork this time :confused: :rolleyes:

masked it up one light coat I will allow to dry, do another light coat tomorrow night, may be a third on Tuesday night, may mask the other side tomorrow night and put first coat on that.

The Dislocation cones i had to get done in 24 hrs, lol.
 
Good, good. Shame you didn't have some better metal that we were welding to. I don't like knocking out stuff like that. But still, it serves the purpose :-|
 
Good, good. Shame you didn't have some better metal that we were welding to. I don't like knocking out stuff like that. But still, it serves the purpose :-|


dont worry the mud will fill the holes/lumps/bumps :D:D:D:D

And with the runs of my paint work you'll not see them, lol
 
Geoff some cool bids there mate looks like you had fun:D
I'm working nights all this week but will pop over to ya on sat if your in and pick up my boards and give ya the cash:) will give ya a call
 
Link to the lanes i drove in Devon. These are not the best lanes by far but the only ones i had time to drive again and get some pics. the first time i drove them was shown them by a guy from local 4x4 club, the map he had of south devon was covered in highlight pen of off road places to drive, the lucky lucky bastids. We drove the first two hours and did not get further than two miles from our starting point and probably not more than 20 mins driving on the road, even the little country lanes are a joy to drive. keep your eye out in the second water run, the fourth from last post on the right i took my eye of the road for a second and my back wheel slipped of the road, under that water is thick thick mud not like that baby mud matt and nick got stuck in, wish i had time to vid the rest but i had pretty little villages to go and look at. How many pretty villages came one person view in two weeks, too ****ing many, thats how many.
lucky having that many lanes nearby, heard the whistle when you got back onto the road from the mud :) , hope you gave the car a good wash get all that nasty salty water off.
 
Matt / Geoff,

Are there any 1200's left? if not I'll take a set of 1000. I'm hoping to get over towards Ipswich this week, if not I can BACS the dosh until we meet up next.

Some good clips there Geoff. Sounds like you had a good trip, but I think I'd be tempted to take a trip down a few fresh water fords to thoroughly wash that salt off.
.
 
Another few hrs of grinding and welding on the disco today with the help of Matt we got the drivers side wheel arches done :):):):).

So we are getting there now, Just been out side undersealing the wing repairs and spraying the upper/inner surfaces.

Looks like progress is now well underway. Can you hurry up a little? My MOT is due in Oct :( I don't want Matt getting bored!
 
Looks like progress is now well underway. Can you hurry up a little? My MOT is due in Oct :( I don't want Matt getting bored!

Dont worry with mine and his dissco he ant getting bored, lol.

Have you started to poke about to see what is rotten yet?

2nd coat of underseal on and second coat of paint on now......
 

Similar threads