Discodad said:
Laning:
Provided I get the Disco sorted intime I'm going to suggest a day laning on Saturday 18th
Its the driving day on Sunday which I won't be able to make.
Who is up for it and where to go.
I think my vote would be the route we did after Christmas. But incorping Terling Ford (on route down, well for me :D ) and Good Easter ford (never been before).

Also I'm going to try and do the lift kit during that week (commencing Monday 13th) Stu would it be OK to borrow the spring compressor then.
Anyone want to come round and help for a few beer tokens.

How long will it take?

Drizz, I think an A team paintwork would be good with them big wheels!
How is the project coming along?
Click to expand...

For a mechanic half day, i would allow yourself a day make sure you have everything to hand so you have'nt got to go out to get something.

Saturday is good to do the xmas route plus a few fords, on the understanding
if my motor is'nt fixed you can't go without me again.
 
wickford90 said:
For a mechanic half day, i would allow yourself a day make sure you have everything to hand so you have'nt got to go out to get something.

Saturday is good to do the xmas route plus a few fords, on the understanding
if my motor is'nt fixed you can't go without me again.
Click to expand...

LOL - I forgot about that!
Hopefully 2nd time lucky.

I might try and get a days leave booked that week then, don't want to be stopped by a half done motor.
Just hoep the kit arrives on time.
 
Nick. I can give you a hand. It actually took me a day and a half - 2 days near on as I had a lot of issues with stuck things and a jack that kept on collapsing :(

I would suggest you start soaking all bolts we need to undo INCLUDING turret rings and spring retaining clips. You'll want 2 new front turret rings as these will snap. They're only £2 each so get them as sods law states if you try and undo them over the weekend, no one will have them instock!!!

And you'll want the usual axle stands (tall as you can get) and 2x trolley jacks. I've got a huge one and a smaller one I can bring if needed. Got a set of spring compressors too but I don't reckon they'll last much longer so you'd be best off robbing Stu's.
 
Last edited:
matthew2riches said:
I wasn't in none of them :mad:

Sure my disco is invisible. A stupid old woman nearly drove square into me head on today too :eek:
Click to expand...

You wasn't in any of of them. ( you can not use double negatives in the same sentence, did you not pay attention in english class's )

good news cv's are ok, bad news is swivel pin bearing are donald ducked.
no prizes for guessing who will not be going laning again. while im under there gonna change all oils and replace steering rods with heavy duty ones, replace drop arm ball joint and no doubt some other fecking part will fall off while im under there. Oh well now i've got that off my chest gonna crack open another bottle of red and get totally rat arsed.
 
wickford90 said:
You wasn't in any of of them. ( you can not use double negatives in the same sentence, did you not pay attention in english class's )

good news cv's are ok, bad news is swivel pin bearing are donald ducked.
no prizes for guessing who will not be going laning again. while im under there gonna change all oils and replace steering rods with heavy duty ones, replace drop arm ball joint and no doubt some other fecking part will fall off while im under there. Oh well now i've got that off my chest gonna crack open another bottle of red and get totally rat arsed.
Click to expand...

Oh bad luck, do you think you'll get them done in time for the 18th?
 
Big Stu 12 said:
If I am about I'll give you a hand Nick.

Just get squirting NOW on all your bolts............
Click to expand...

Cheers Stu,
If the kit arrives on time I might try and get the 14th off.
Also need to think about replacing the doughnut. Its not looking good and I'm sure the lift kit will finish off (mostly likely to happen in the middle of Terling ford :eek: )
 
Discodad said:
Cheers Stu,
If the kit arrives on time I might try and get the 14th off.
Also need to think about replacing the doughnut. Its not looking good and I'm sure the lift kit will finish off (mostly likely to happen in the middle of Terling ford :eek: )
Click to expand...

Nothing major will happen, you'll just get a terrible vibration and clonking sound. I'm going to get a spacer jobbie made up for mine.
 
matthew2riches said:
I'm going to get a spacer jobbie made up for mine.
Click to expand...

Will it just be a solid one.... I hope not, as the prop will not be able to move with the diff/gear box.

Best way is to put a 200tdi or a V8 prop on it with a UJ at both ends then use a spacer to make up the lift diiferance , you can get a spaer for about £20.00

15mm propshaft Prop spacer Land Rover Discovery Tdi | eBay UK

you will also need a one of these

LAND ROVER DISCOVERY 1 4 BOLT REAR DIFF FLANGE KIT | eBay UK

That then get rid of the doughnut.

or of course put a wide angle prop on.......
 
Last edited:
Really hoping for some laning soon :(

I've cleared my office desk today of 3 months worth of paper work and coffee stains.

Got the new backup system installed on Mac servers AND begun to tidy cables up :eek: :eek: :eek:

HELP!!!
 
Hey any of you guys want to do the Pilgrims way at maidstone sunday around 1pm if you fancy it let me know here or just turn up, if memory serves it starts at Stede rd or hill ok cheers
 
The V8 man said:
Hey any of you guys want to do the Pilgrims way at maidstone sunday around 1pm if you fancy it let me know here or just turn up, if memory serves it starts at Stede rd or hill ok cheers
Click to expand...

Have you checked to see if it is a BOAT, and if there are no TRO's on the Pilgrims way?, I dont know of the route myself so cant comment.

Also have you planed the route, to me if your memeory serves you right sounds like you dont know it all that well.

I will not be able to do it as its a bit far for me to come , but thanks for the invite.
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
1K
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
8K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
10K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
1K
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
3K
hoopfish
hoopfish