matthew2riches
New Member
where have these ropes got to then??
I was wondering........
HOW LONG IS A PIECE OF ROPE??? YOU'LL GET THEM WHEN THEY'RE HERE!
I was wondering........
HOW LONG IS A PIECE OF ROPE??? YOU'LL GET THEM WHEN THEY'RE HERE!
Co-Pang-Yang
Well-Known Member
Getting there. Trucks now drives!!!
Both props are on, adjustable panrod arm on, steering arm on handbrake done, engine oil topped up, transfer box oil done, gearstick and trim back together, bonnet on and rear diff guard on.
Got the airbox to fit along with grill, bumper plus re-seal one dodgy wheel. Also gonna try and do the tracking using some chalk and a length of wood.
Then gotta change the tires on the caravan, wash it, Hoover it, tiger seal the windows back in lol and check the lights.
Oh and MOT the truck at some point.
Both props are on, adjustable panrod arm on, steering arm on handbrake done, engine oil topped up, transfer box oil done, gearstick and trim back together, bonnet on and rear diff guard on.
Got the airbox to fit along with grill, bumper plus re-seal one dodgy wheel. Also gonna try and do the tracking using some chalk and a length of wood.
Then gotta change the tires on the caravan, wash it, Hoover it, tiger seal the windows back in lol and check the lights.
Oh and MOT the truck at some point.
Big Stu 12
Well-Known Member
Sounds like your geting there Chris, all be done soon.
Hold on....
I'm being left courier card messages on my Disco!!!:screaming_bug_eye_f
BTW Stu, it's still pretty dirty!
I was going to write "Please DONT wash me" in the mud, but most of it was on the floor,
Bet no one will park there now,
Hope you can make it Brian , see good to catch up with you again.
matthew2riches
New Member
Got a new ball joint on rear anti rollbar today. New bolts to go on the panhard rod tomorrow as the others had the thread stripped the other week
Might try and get rear door chequer plated tomorrow depending on work!
Might try and get rear door chequer plated tomorrow depending on work!
Big Stu 12
Well-Known Member
Got a new ball joint on rear anti rollbar today. New bolts to go on the panhard rod tomorrow as the others had the thread stripped the other week
Might try and get rear door chequer plated tomorrow depending on work!
You should of riped the anti roll bars off,
Co-Pang-Yang
Well-Known Member
Another disappointing end to the day.
Took the truck for a test drive and its all over the place. Pulling to the right and swerving left and right feels like its gonna roll over and that was at about 20mph. Tried adjusting the tracking but wasn't really getting anywhere so gave up and came home.
Also tried hooking up the caravan and the back end of it is pretty much dragging on the floor so looking less and less likely i'll be going to the show.
Took the truck for a test drive and its all over the place. Pulling to the right and swerving left and right feels like its gonna roll over and that was at about 20mph. Tried adjusting the tracking but wasn't really getting anywhere so gave up and came home.
Also tried hooking up the caravan and the back end of it is pretty much dragging on the floor so looking less and less likely i'll be going to the show.
matthew2riches
New Member
Feels much better on the road to be honest. Feels slightly less like I am using a rudder to stear now.
Big Stu 12
Well-Known Member
That is bad news,
Tuskenraider
New Member
Bloody hell, not post for a couple of weeks and you end up with 20 pages to get through
Well mine is back on the road finally, got a replacement box but the input gear spline was shagged, got a replacement gear and ordered the wrong one finally ordered the right one and all fitted
It even passed the MoT on Monday with only 4 advisories
If anyone wants a genuine 28 tooth input drive gear with brand new timkin bearings then let me know
Well mine is back on the road finally, got a replacement box but the input gear spline was shagged, got a replacement gear and ordered the wrong one
finally ordered the right one and all fitted It even passed the MoT on Monday with only 4 advisories
If anyone wants a genuine 28 tooth input drive gear with brand new timkin bearings then let me know
Big Stu 12
Well-Known Member
Bloody hell, not post for a couple of weeks and you end up with 20 pages to get through
Well mine is back on the road finally, got a replacement box but the input gear spline was shagged, got a replacement gear and ordered the wrong one
It even passed the MoT on Monday with only 4 advisories
If anyone wants a genuine 28 tooth input drive gear with brand new timkin bearings then let me know
Good enws at last for you Tusken, you must visit the thread more, we have loads to say, lol.
Now your Discos working get yourself to the Suffolk 4x4 show and meet a few of us, lol, also a good run out for the Disco...
matthew2riches
New Member
Slroc website seems to have gone down
Big Stu 12
Well-Known Member
Its ok , i been on it
matthew2riches
New Member
It's back again. How strange.
Co-Pang-Yang
Well-Known Member
Glad to hear you got yours sorted tusken.
Well mines being taken for its MOT in the morning whilst I'm at work so hope that goes well.
Well mines being taken for its MOT in the morning whilst I'm at work so hope that goes well.
Co-Pang-Yang
Well-Known Member
Tomorrow 9-6 in sudbury then start in Colchester at 7 till midnight.
Co-Pang-Yang
Well-Known Member
Ah sorry dear. Around monday though I think
matthew2riches
New Member
Made some more biodiesel yesterday evening for the weekend
