R

relandy

New Member

• Dec 18, 2004

• #1

Hello Landy peeps
Im' new to this site and game of Land Rovers.

My Landy is a 1970 Series 2A Truckcab 2/4 Diesel,

The Problem is, I am having to stop the engine with the Clutch (ie in gear foot on breaks release Clutch).

I have replaced the Stop Cable but still nothing, I have moved the linkage that cable goes to up and down again nothing...

I would be greatfull if any one has any ideas about this
cheers
Rob

 

Graham Wilkinson

Active Member

• Dec 18, 2004

• #2

The only other part that would cause this is the lever on the side of the injection pump, if you move this by hand and the engine still doesn't stop then the fault is inside the pump which will req a specialist repair
Graham

 

accywingy

Large Member!

Administrator

• Dec 18, 2004

• #3

If thats the case diesel pump repairs don't ussualy come cheap..
I'm sure there will be a local specialist, nearest one here i think is Walsh and Midgley in Blackburn, not cheap but they do a good job.
Best of luck

 

R

relandy

New Member

• Dec 18, 2004

• #4

Hello again
Have tried moving the leaver and as you say nothing.
so looks like a new pump then.

Cheers for your input guys
Merry Christmas
Rob

 

R

relandy2

New Member

• Mar 31, 2005

• #5

Hello all
Sorry update been a while (other commitments to presidence)
The Pump is now sorted it was the springs in the
Pump housing had broken off

Thanks for your Help
Till Next Time

Rob