Datatek · Feb 3, 2013

Colin1 said:
Hey thanks for the info Datatek not wanting to pinch this thread but my RR is a DHSE 2001 model BMW engine . You refer to the latest RF receiver ! will mine not have the latest one , if not i will try find out where i can get one .

Once again many thanks and sorry for high jacking this thread.

Regards
Colin..

The last model receiver came out after production of the P38 stopped. You can see which one you have if you take it out of the box and compare to the pictures posted earlier on another thread. Island 4 x 4 seem to be about the best for the receiver. Don't buy off Ebay, you are likely to get an old receiver in a new case.

Colin1 · Feb 3, 2013

Datatek said:
The last model receiver came out after production of the P38 stopped. You can see which one you have if you take it out of the box and compare to the pictures posted earlier on another thread. Island 4 x 4 seem to be about the best for the receiver. Don't buy off Ebay, you are likely to get an old receiver in a new case.

Thanks for that , now i know what to look for ,, i think

Colin.

stopover · Feb 3, 2013

Not cheep. GENUINE Range Rover P38 Alarm Reciever YWY500170 | eBay

or Range Rover P38 Alarm Reciever (YWY500170) | eBay

try a google with YWY500170

Datatek · Feb 3, 2013

stopover said:
Not cheep. GENUINE Range Rover P38 Alarm Reciever YWY500170 | eBay

or Range Rover P38 Alarm Reciever (YWY500170) | eBay

try a google with YWY500170

As I said, I wouldn't touch one from Ebay, especially at that sort of price, no guarantee they are genuine Mk 3 units in the plastic housing.
Island 4 x 4 had them cheaper than that.

mozz smith · Feb 3, 2013

Datatek said:
As I said, I wouldn't touch one from Ebay, especially at that sort of price, no guarantee they are genuine Mk 3 units in the plastic housing.
Island 4 x 4 had them cheaper than that.

well done datatek correct again ...part no is YWY500170 THERE IS PHOTOS ON THIS THREAD SOMEWHERE ,,,make sure it has the GREEN round sticker on it ....mozz:crazy_driver:

Datatek · Feb 3, 2013

mozz smith said:
well done datatek correct again ...part no is YWY500170 THERE IS PHOTOS ON THIS THREAD SOMEWHERE ,,,make sure it has the GREEN round sticker on it ....mozz:crazy_driver:

Unfortunately Mozz, the green sticker means bugger all as the insides get swapped. The only way to tell is to look at the circuit board.

greenslade · Feb 3, 2013

Not in a position to comment on the second eBay link, but the first one is the eBay outlet for Fews, my local Land Rover main dealer. I bought an updated RF receiver from them a year or so ago. Expensive, but less expensive than continually replacing front door locks. My trials and tribulations with burnt-out door motors were documented on another RR site. But (touch wood) no more burnt door looks since. In summary, if you can't get one from a reputable supplier cheaper, then fews1 is a safe bet for a genuine one.

Sideline · Feb 4, 2013

Thread hi jack here again. I am getting engine disabled read out on my P38a DT. I fitted my RF receiver from Island 4x4, no joy.
Is it plug and play or do I have to do a reset?

Saint.V8 · Feb 5, 2013

You will need to enter your EKA code me thinks....

Datatek · Feb 5, 2013

Sideline said:
Thread hi jack here again. I am getting engine disabled read out on my P38a DT. I fitted my RF receiver from Island 4x4, no joy.
Is it plug and play or do I have to do a reset?

The RF receiver is plug n' play. If the engine disabled message was there before you fitted it it will not resolve the situation. As Saint V8 said, you will need the EKA code for your car. The new receiver will prevent other problems in the future.

Sideline · Feb 5, 2013

Datatek said:
The RF receiver is plug n' play. If the engine disabled message was there before you fitted it it will not resolve the situation. As Saint V8 said, you will need the EKA code for your car. The new receiver will prevent other problems in the future.

Thanks lads, I'll input the EKA code this evening. I plugged it in last night I thought it might pick up the new sensor. The battery needed a charge anyway after my attempts at starting.
We had our first fall of snow here last night I would like to have taken the P38 to work instead of my mothers Polo that I have at the house for repairing.

mo rov · Feb 3, 2018

nothing is working this is about the 15th time this engine disable has happened (in the past year) and the code trick is now not working RR 95 down 2 weeks now --- can i totally bypass this? please help! Thank you!

Saint.V8 · Feb 3, 2018

Only way to bypass is to disable in the BeCM.

fucmeitsandy · Feb 3, 2018

Where are you ?

Datatek

Well-Known Member

Colin1

New Member

stopover

Active Member

Datatek

Well-Known Member

mozz smith

Well-Known Member

Datatek

Well-Known Member

greenslade

Member

Sideline

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Datatek

Well-Known Member

Sideline

Member

mo rov

New Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

fucmeitsandy

Well-Known Member

Similar threads