flat
Well-Known Member
good man cheers.
hopefully we can make this a semi-regualr thing, every few months perhaps
DaveyGTi
Well-Known Member
You need a very long spanner- or perhaps some very small hands!
DaveyGTi
Well-Known Member
Yeah I'm defo not adverse to a regular meet- Sussex lanes open at the end of March and I know a few good cafes round here! Keen to get back to Salisbury Plain too at some point, my last outing there was a bit, er, wet!
thks, just can’t get the angle and will have a search on ebay for some extra long spanner
had to use a irwin socket as the other nuts were round off, this strut is at least 10 x years old so done well
have just order some long reach impact 6 x sided socket for the bottom bolt and a small set of ratchet spanner’s
will be useful for the other side as this drivers side is the easiest one
many thks so much once again
plus 1 ref the regular meets , like it because it’s local and don’t have to drive 100 x miles or so to reach other greenlanes
will also be nice if maybe in the summer to have a weekend camping trip
DaveyGTi
Well-Known Member
Yeah defo up for a camping trip, I've got a long list of other place I want to explore laning!
sounds great , my parents kindly bought me a tent and didn’t realise it’s a 6 -8 person one so plenty of room for the dogs, lol
will be really good for all of us to meet up on some greenlaning trips
Mr S1
Well-Known Member
Thought was who was working on it
Only jesting mate
u cheeky mare , LMAO
managed to get the large bottom bolt out, kept jumping on the breaker bar
just this bleeding back bolt , took me around 4 x hours by the time i had striped everything down
may i ask did ur torque wrench go up to 300nm or 221 iilb ft plse , for the life of me i can’t remember
this is the easy side
bless u, looking on ebay for torque wrenches to go up 300nm are in excess or £200 quid and will only use it twice for the bottom bolts
maybe if i torqued it to 210nm then give it some more welly with a breaker bar,
plenty of room for that big bolt to get an air gun on , so for the passenger side it would be perfect to get the bolt undone plse
have ordered some long reach spanner , for the top nuts
https://www.ebay.co.uk/itm/PRO-5pc-...242070&hash=item4b0a12cec5:g:hzwAAOSwQS1aKWJR
have got all new nuts and bolts
bless u and many thks , would be awesome then to get it correctly torqued
didn’t do too bad today , tommorow is supposed to be horrible again with sunshine weds , yippee
getting there very slow and steady , lol
If we're on yours on 20th, if at all possible I'd like to have a go at getting mine done on the 21st if we can....I really fancy taking mine !
if flat doesn’t mind and would be so kind coming to u on the 20th plse , i can then carry on with mine
then if req can drop over to u on the 21st if needed , in order then 3 x of us can concentrate getting urs ready for the trip
but only if that’s ok with u, just trying to ensure ur up and running , i can plod along for the next few weeks
what do u think as it would be perfect if both are ready for the trip
deal, i don’t remember any deal, lol
u and me both , will also be seriously gutted if we can’t get urs up and running , but the only thing we can do is play it by ear and see what the day brings
should have the drivers side finished by this weekend , then can start on the passenger side , that will be the pig
