C

Colin from Hull

Active Member

• Dec 29, 2013

• #1

Hi,
Ive been driving around on manually inflated airbags for months during this time I changed a front sensor which come up as a fault, so i thought today was the opportunity to go back onto my compressor. So i plugged in software and cleared my faults.
So no faults showing or bleeps on my dashboard now. But my car doesnt seem to want to move at all, lights showing on dashboard (Loading light on, Standard height light just flashing, compressors is runnning.
Thanks any help. Colin

 

wammers

No longer with us, RIP

Donater

• Dec 29, 2013

• #2

It may very well be running. Is it producing and usable air, if it is where is it going, because it ain't going in the tank is it? No airy no worky. Read my "How to" check for output and check diaphragm valve for leaking.

 

C

Colin from Hull

Active Member

• Dec 29, 2013

• #3

Hi,
Yes ran out of daylight! Thats what im planning to do tomorrow, just thought i would put my problem out there, i will let you know how i get on. Thanks!

 

Grit Valve

2000 4.6 Vouge

• Dec 29, 2013

• #4

Have you waited for the system to fill fist before raising I take it its the one light ie the hight you selected wait with door open first.

 

C

Colin from Hull

Active Member

• Dec 29, 2013

• #5

Hi Thanks
Yes thats the one i have selected, why do i need a door open?

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Dec 29, 2013

• #6

if the tank is depleted, leaving a door open freezes the height changes and allows the pump time to fill the tank...

 

Grit Valve

2000 4.6 Vouge

• Dec 29, 2013

• #7

Colin from Hull said:

Hi Thanks
Yes thats the one i have selected, why do i need a door open?

Click to expand...

Becuse your storage tank is empty and if you reset everything start car up and select hight with door closed its trying to fill the tank and ( try) to raise the car at the same time no chance .
By leaving the door open for five mins of so your tank will have enough pressure to raise the car it will freeze the eas system

 

C

Colin from Hull

Active Member

• Dec 29, 2013

• #8

Hi,
I will try that now! thanks

 

Grit Valve

2000 4.6 Vouge

• Dec 29, 2013

• #9

See you in approximately 11 minutes

 

C

Colin from Hull

Active Member

• Dec 29, 2013

• #10

Hi
Yes! that worked. Thanks
I was reading another thread and everyone seems to lock the suspension on Motorway height, i tried to select this height but it goes pass to the lowest setting, do i have lock this at 50 mph?

 

Grit Valve

2000 4.6 Vouge

• Dec 29, 2013

• #11

Colin from Hull said:

Hi
Yes! that worked. Thanks
I was reading another thread and everyone seems to lock the suspension on Motorway height, i tried to select this height but it goes pass to the lowest setting, do i have lock this at 50 mph?

Click to expand...

Keep the inhibitor switch pressed in it will only move one stage at a time