No idea of the thread size but it's a standard part used on air powered systems can be purchased from air line suppliers of perhaps Ebay.
 
I have tried bsp , npt and metric with no joy.have also tried el cheapi silencers off ebay that won,t fit
 
Colly57 said:
I have tried bsp , npt and metric with no joy.have also tried el cheapi silencers off ebay that won,t fit
Click to expand...
I have never had cause to check the thread size, working on air powered machines, there was always a bin full of them available so sorry I cannot help.
 
These 8mm compression fittings screw in nicely. I think they are 1/4 bsp threads?

1682355142574.png
 
Thanks for the replies guys, i have a silencer but am always on the lookout for cheaper replacements/spares.with shipping included to australia even the ebay offerings work out dear.have tried bsp fittings and they do not fit. Was actually looking to fit a hose to it to make it easy to check leakage whilst i was getting valve block back into working order
 
Try an NPT fitting, or leave it out. Took mine out so I could hear when it's doing its thing, and never got round to putting it back.
 
You must log in or register to reply here.

Similar threads

Flossie
P38A Eas issues
2
Replies
22
Views
1K
Datatek
Datatek
pwood999
P38A Asthmatic EAS Exhaust Port !!
Replies
6
Views
649
pwood999
pwood999
B
P38A P38 EAS SOS
2
Replies
29
Views
1K
Mark Piercy
Mark Piercy
Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
960
Datatek
Datatek
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
875
kevleaper
K