RR Qatar

Active Member

• Jul 11, 2013

• #1

Morning people, anyone in the St Helens area with the kit to re- calibrate/ reset ride heights on my 96 DSE, checked codes with Faultmate FSR none showing, car rides too high,obviously tea biscuits and or beer tokens would be in involved, Thanks in advance.

 

JohnnyCrash

New Member

• Jul 11, 2013

• #2

I live in St Helens, will be around Friday Evening and all day Sunday

PM me your number, also try "Nik the Geek" he's in Windle I think

 

NikTheGeek

New Member

• Jul 11, 2013

• #3

Billinge actually. But close enough! I can help, but with a wife, 2 kids, 2 horses and a boat, I have absolutely no idea what I'm doing this weekend but it'll be safe to assume I'll be out for most of it!

 

RR Qatar

Active Member

• Jul 11, 2013

• #4

JC pm sent, NTG understand your time is tight appreciate the offer, will see if I can arrange to sort with JC cheers for the offers will let you know the outcome.

 

RR Qatar

Active Member

• Jul 14, 2013

• #5

Just like to say a big thanks to Johnnycrash for resetting my ride heights which were way out, top man cheers for you're time and hospitality.

 

JohnnyCrash

New Member

• Jul 14, 2013

• #6

not a problem, always here to help a fellow LZ member

 

Musicmaker

Active Member

• Jul 14, 2013

• #7

I'm sure I need my ride heights done. What is the method? I have EAS software from RWS, do I put the car on standard profile then measure from the centre of the hub to wheel arch, then adjust the figures accordingly?

Billy

 

Datatek

Well-Known Member

• Jul 15, 2013

• #8

Musicmaker said:

I'm sure I need my ride heights done. What is the method? I have EAS software from RWS, do I put the car on standard profile then measure from the centre of the hub to wheel arch, then adjust the figures accordingly?

Billy

Click to expand...

Hub centre to wheel arch for all 4 heights, measurements are in the "How To" section I believe. Adjust in very small steps, if you go out of range if will go to default settings. Look at the RSW web site for more info.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Jul 15, 2013

• #9

As Attached

 

Attachments

• 
  P38_EAS_HEIGHTS.jpg

  102.7 KB · Views: 316

Musicmaker

Active Member

• Jul 15, 2013

• #10

Thanks, checked my ride heights and they were within the tolerances. It looked as if the standard height was too high, but within +/- 4mm.
Cheers again
Billy