myfirstl322
Well-Known Member
No offence Rach, but i have to imagine you in a tight boiler suit and very heavy bust, had a VERRRRY endowed girl do work experience in a garage i was in decades ago, and i occassionally reminise.... mmmmmmmm
Ant see post 2. Do i get a prize?
Does this mean I win a prize???
Yep, to collect it stand outside Victoria station at 10 PM on Sunday, wearing pink trousers, a pink shirt, a pink jacket with a pink rose in your lapel. And one hand on your hip.
I'll see ya at Victoria Station next Sunday....bring lube
myfirstl322
Well-Known Member
..freaKYI'll see ya at Victoria Station next Sunday....bring lube
Datatek
Well-Known Member
Rachel, just do the compressor check in Wammers guide before you go buying re-furb kits. When doing the heights, you need the key in position 2 or the compressor will not run, I do it with the engine running to avoid the risk of flattening the battery.
You do need the 10 minutes or so with a door open to recharge the tank before you start, or at least untill the compressor shuts off.
Ant see post 2. Do i get a prize?
You do, coz you were right!!!!! :smokin:
lol!!!!!!!!!!!
Thanks hun, yes I did the all access heights on position 2, all excellent.
When I wanted to go to next height, it wouldn't go, as I guess I had emptied the tank.
I think I will do it next weekend with the engine running to be sure.
However tonight, I will run the engine (as Wammers suggested!!!) with the door open for 10 minutes, and charge the tank, just so I can raise her again.
I am guessing now, that the slow lift was because the pump was filling the empty cylinder like mad whilst I was drawing of air to lift, hence the slow raise!!!
Thanks hun, yes I did the all access heights on position 2, all excellent.
When I wanted to go to next height, it wouldn't go, as I guess I had emptied the tank.
I think I will do it next weekend with the engine running to be sure.
However tonight, I will run the engine (as Wammers suggested!!!) with the door open for 10 minutes, and charge the tank, just so I can raise her again.
I am guessing now, that the slow lift was because the pump was filling the empty cylinder like mad whilst I was drawing of air to lift, hence the slow raise!!!
Make sure the tank is full before playing with each height. Don't be sat in the car to adjust then get out to measure, do it all from outside.
Wammers said Air Pressure........I Mentioned running with a door open for 10 minutes to fill the tank.....
You sure did. I think she was very remiss. If that helps.
Wammers said Air Pressure........I Mentioned running with a door open for 10 minutes to fill the tank.....
Oh god!!! Sorry again!!!!! :doh:
crumble
New Member
So was the pressure low from the pump?
Tony, Post #23 - did you see your prize???
Yes i saw it. Can you collect it for me, dressed as described you should have no problems.
Datatek
Well-Known Member
Probably not, it was just no pressure in the tank as it rose fast before.
