quedash

New Member
Hi can you help I am down on the stops:eek:.. need to know how to check what caused it.
If you can help with software etc, please let me know ASAP, towing caravan on holiday next weekend...wifey is going to kill me...probably more than once...:(OUCH.. Compressor maybe, would like to change/renew air bags...anyone know best for supplier?

Cheers
 
Send a pm to Datatek for the software and cable. Have a look at previous posts for suppliers (P38 spares, Island 4x4 etc).
 
Hi can you help I am down on the stops:eek:.. need to know how to check what caused it.
If you can help with software etc, please let me know ASAP, towing caravan on holiday next weekend...wifey is going to kill me...probably more than once...:(OUCH.. Compressor maybe, would like to change/renew air bags...anyone know best for supplier?

Cheers
Try paddock online they should help:confused:
 
Hi can you help I am down on the stops:eek:.. need to know how to check what caused it.
If you can help with software etc, please let me know ASAP, towing caravan on holiday next weekend...wifey is going to kill me...probably more than once...:(OUCH.. Compressor maybe, would like to change/renew air bags...anyone know best for supplier?

Cheers

Most likely a height sensor or a leaking airbag. If you have a laptop you need the EAS suite the cable and probably a USB to serial adaptor. I can supply the cable and EAS suit, if you don't have a laptop think about getting a cheapy fom Ebay, it will save you more than the cost:)
 
hi pal,is your compressor running?if not try bridging contacts 5and3 on relay 20 in main fuse box.if it runs you have a problem in the supply to activate the relay.if not try earthing the pink wire at the compressor connector plug.this bypasses the pump overheat protection.this part is available on ebay (fiddlie job to fit).if it is running is it pumping air?(seal u/s).if it is pumping air,check height sensors for physical damage,air leaks on pipes from valve body and air springs(use soapy water in a spray gun).hope this helps if not go for diagnostics.I found PADDOCK MOTORS of Matlock best price for air springs.
 
Last edited:
hi pal,is your compressor running?if not try bridging contacts 5and3 on relay 20 in main fuse box.if it runs you have a problem in the supply to activate the relay.if not try earthing the pink wire at the compressor connector plug.this bypasses the pump overheat protection.this part is available on ebay (fiddlie job to fit).if it is running is it pumping air?(seal u/s).if it is pumping air,check height sensors for physical damage,air leaks on pipes from valve body and air springs(use soapy water in a spray gun).hope this helps if not go for diagnostics.I found PADDOCK MOTORS of Matlock best price for air springs.

The compressor will not run automatically when there is a hard fault, it can be turned on and off via the EAS software to test it.
 
Thanks Datatek

I will test it out ASAP, Just as soon as I can. (weekend)
Already to go in the morning, :)
 
ok if you have the eas sorfware to test it.anything is worth a try if you are due to go on holiday next week dont you agree.how far are you from the wirral Quedash?Ihave the lead and software if your desperate.
 
ok if you have the eas sorfware to test it.anything is worth a try if you are due to go on holiday next week dont you agree.how far are you from the wirral Quedash?Ihave the lead and software if your desperate.

Nice one Tomcat,
I will PM you m8y
 

Similar threads