J

johnnysensi

Active Member

• Dec 30, 2015

• #1

Doing my upper and lower ball joints ...I've placed axle stands under axle ...just got my swivel hub carrier off after some trouble ...trouble is the air suspension has now lowered itself
...is there anyway of getting the eas to work on axle stands ?....now I can't get enough clearance to press the joints out ...or do I have to do it upside down lol .

 

wammers

No longer with us, RIP

Donater

• Dec 30, 2015

• #2

johnnysensi said:

Doing my upper and lower ball joints ...I've placed axle stands under axle ...just got my swivel hub carrier off after some trouble ...trouble is the air suspension has now lowered itself
...is there anyway of getting the eas to work on axle stands ?....now I can't get enough clearance to press the joints out ...or do I have to do it upside down lol .

Click to expand...

If you have one of the ball joint removal kits off eBay you should be able to do both from the bottom. Or start the car and send suspension up.

 

J

johnnysensi

Active Member

• Dec 30, 2015

• #3

Eas is throwing a hiss fit and won't move ....upside down it is then ....

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Dec 30, 2015

• #4

Did you have a door open during the time the car lowered itself? If so, you have a leak....

Remember, when on axle stands and you are working under or near the car, leave a door open a crack to freeze the system.

 

J

johnnysensi

Active Member

• Dec 30, 2015

• #5

Doors were open ...was a good whack on hub carrier and it dropped eas....now on eas button I got lowest setting flashing and highest level flashing

 

J

johnnysensi

Active Member

• Dec 30, 2015

• #6

Got eas working ...we have lift off....