storm said:

Hi, I'm having EAS problems, changed all 4 air springs with new ones, as one was leaking, then got EAS Fault - 35mph max. EAS Unlock showed NSF height sensor fault, so swapped them over & fault was then on the other side. Fitted a s/c hand one with 90 day warranty, but still shows EAS Fault & goes into limp mode.
Can the re calibration be done on EAS Unlock? or how else?
I also have a ABS fault showing, I have fitted new front ones, would off changed the rears but they sent the wrong ones!
Speedo does notwork either!
1995 - P38 - 4.0SE Auto.

Click to expand...

storm said:

Hi, the swinging arm will rotate freely round on the sensor to suit the other side, just need to swap the bolt over that secures to the chassis.
When I swapped the 2 front sensors over the fault moved to the other side. The connections are all clean.

Click to expand...

storm said:

Very sorry, I only meant to say what I had done, I need as much help as I can get as I'm at a bit of a lose with these problems.

Click to expand...