RangeRoller dt
Well-Sprung Member
It’s an early DT so it shouldn't have things like hevac, fog lights, etc but it does. No CC or MPG crap or TC fitted thought they were standard on later models?
Flossie
Well-Known Member
I'll nip out and have a press, see if mine move, I've got cruise.
RangeRoller dt
Well-Sprung Member
If you have CC then the buttons are there. Sounds like your stalk is ******
Flossie
Well-Known Member
mine's a diesel and has the two buttons,if you press the wrong one you set the speed alarm,sh1t myself when it won't off the first time as I inadvertently set it for 30mph.
tomcat59alan
Well-Known Member
tomcat59alan
Well-Known Member
Flossie
Well-Known Member
Datatek
Well-Known Member
If you replace the stalk with one that has the buttons that operate, you will get MPG, range remaining etc. The only caveat is that if you have a Lo line BECM it may not work, it certainly works on the Hi line BECM.
RangeRoller dt
Well-Sprung Member
Initially I thought I should have a low line becm, but I have things that a hi line one is needed for? Either it’s a hi line one or quite a bit has been bodged in somehow
Datatek
Well-Known Member
A stalk from a breaker costs little and it's a straight swap, the connector is there behind the plastics.Initially I thought I should have a low line becm, but I have things that a hi line one is needed for? Either it’s a hi line one or quite a bit has been bodged in somehow
tomcat59alan
Well-Known Member
Post#397.
